Interested to Buy Any Domain ? << Click Here >> for more details...
Define threshold voltage?
- 32 Answers
- 134361 Views
- College School Exams Tests, Intel, JHG, Wipro, I also Faced
- E-Mail Answers
Answers were Sorted based on User's Feedback
Answer / premalatha
threshold voltage is defined as the minimum voltage that
required to make the transistor ON. transistor may be
either NMOS or PMOS.For NMOS the value of threshold voltage
is positive value and for PMOS the value of threshold
voltage is negative value.
| Is This Answer Correct ? | 538 Yes | 48 No |
Answer / harsha
thresold voltage is minimum voltage that requires to turn
on the mosfet transister & that conducts the drain current
| Is This Answer Correct ? | 174 Yes | 34 No |
Answer / vijay
Its a minimum gate voltage in the transistor at which the
conduction of current begins.
| Is This Answer Correct ? | 97 Yes | 18 No |
Answer / khush
Threshold voltage (Vth) is the voltage level at which the
transistor turns ON & the Drain to Source (Ids) current
starts conducting.
| Is This Answer Correct ? | 73 Yes | 15 No |
Answer / manikandan
The minimum voltage required to have the conduction between
drain and source.when the vgs=vth(threshold voltage)only
conduction chanel is formed and conduction takes place.when
its more than vth conduction between drain and source takes
place
| Is This Answer Correct ? | 44 Yes | 13 No |
Answer / -@x44@-
It is the gate voltage where an inversion layer forms at the
interface between the insulating layer (oxide) and the
substrate (body) of the transistor. In other words, it is a
minimum voltage that will trigger the gate to operate. It
can be positive or negative.
| Is This Answer Correct ? | 35 Yes | 13 No |
Answer / iqra
The threshold voltage of a MOSFET is usually defined as the
gate voltage where an inversion layer forms at the
interface between the insulating layer (oxide) and the
substrate (body) of the transistor
| Is This Answer Correct ? | 13 Yes | 5 No |
What happens when the gate oxide is very thin?
Explain Custom Design Flow?
What happens if we use an Inverter instead of the Differential Sense Amplifier?
What are the steps involved in preventing the metastability?
what is the difference between the TTL chips and CMOS chips?
What work have you done on full chip Clock and Power distribution? What process technology and budgets were used?
What does it mean “the channel is pinched off”?
What is validation?
Draw the SRAM Write Circuitry
For a 0.18um and 0.8um technology MOSFET, which has a higher cutoff frequency?
For f = AB+CD if B is S-a-1, what are the test vectors needed to detect the fault?
How many bit combinations are there in a byte?
86 Family 
