Answer / p.k.chadhar

in the construction field the roll of electrical engineer is
as follows
1-he has to see the basic design engineering of the project
2-detail engineering with safety factor in the design .
3-basic & detail engineering for provision of earthing pits
of electrical intallation.
4-design for illumination of different area and lux calculation.
5-cable size calculation cable scheduling &its route
selection ,over head or under ground
6-proper protection system for all electrical installation .
7-design for fire alarm &detection system &so many more
which i am not writing here

Answer / sudarshan

The main role of electrical engineers in construction
projects is to supervise the electricians in handling all
the electrical works considering the safety and quality
requirements. The electrical engineer in the construction
site also reads and studies the electrical plans (usually
done by electrical design engineers) and implement it in
the site and sometimes do necessary actions whether to
correct or to improve the design. They coordinate with
other electrical engineers in the implementation of the
electrical system design and also with other engineers of
different fields, such as civil and mechanical engineers,
to make the construction job easier.

Answer / mariappan

• Study of drawing and execute the work
• To co-ordinate with Electrical Contractor for Electrification, Execution, Erection & Commissioning.
• To provide the entire electrical solutions as per requirement.
• Design for illumination of different area and lux calculation.
• To check the entire work as according to approved drawings.
• Handling of electrical load as per requirement.
• Cable size calculation cable scheduling &its route selection ,over head or under ground.
• Review Inspection and Test Plans in order to perform all required inspections and witnessing all required tests and add witness and hold points for the Client’s Inspection.
• Review inspection reports and records of Quality Control carried out on completed and running Project activities.
• Review Client’s Inspectors deliverables, analyse and resolve issues and problems emerging during the Quality Control activities. Ensure that all inspection and tests witnessed by clients
• Drawing submission and get Approval from consultants
• Site issues highlighting and send to consultant
• Site Additional work Prepairation and send the Quotation
• Check and Plan the EOT Date & schedule of the Project
• Every two week once attend the site technical coordination meeting
• Monthly once attend the site safety coordination meeting
• Detail engineering with safety factor in the design.
• Updating the Drawing depends on site condition
• Mock up unit Prepairation and execution
• Checking the Workmanship and material Quality as per approved make and standard work for the Right quality and standard work
• Daily & Weekly work Progress Report Prepairation and Keep the Record
• Preparing the Monthly work Progress Report for Claim with Measurements
• Monthly LEW Tools inspection check list Prepairation and checking
• Daily I conduct and maintain the tools box meeting and checking the Height work Permit (above 2m)
• Preparation of Project Report for correct and Timely information for the Progress of work
• Responsible to do surveys including site measurements
• Responsible for Highlighting foreseen Problem & Delays in advance Escalating to the PM
• Client communication and correspondence
• Quality Assurance
• Coordination with workers
• Manpower Controlling and solve the Problem
• Updating of material stock
• Weekly Material Requirement to be send by email to office
• Final Documentation & Billing Works

Answer / balaji

1.Ensure power supply available.save energy by disconnecting
unwanted loads.
2.ensure all electrical machines should be earthed ,because
in construction mostly related with steel structures,if any
leakage from machine then persons will get shock.
3.if work is going on outside protect machine by covering
that from rain fall.
4. make awareness to all people how to switch off power in
case of any electrical accident.

Answer / saleem

As an engineer our responbilities on site is make sure that
the electrical installation should be as per IS code or
National code as applicable according to authority,proper
designing of system,maintenance view,feature extention etc.

Answer / shiva

Ensure the power supply 24x7.
ensure all the provisions for electrical systems in place
for future n present

Answer / srinivas.v

mainly he/she has to study the electrical drawing well and timely inspect that the electricians are doing accordingly.

Answer / hidayath

1)The main roll of Electrical Engineer in Construction
field is fully about safety,power consuming ideas and
limiting the wastage of power supply.
2)Creativity in designing new circuits which is capable of
the building design.
3)Reducing the Power consumption day by day.

Answer / ruds

it bl b awesome to b an electrical engineer in construction field. ^_^

Answer / dharmendra kumar

Top-performing electrical site engineers have good communication skills in addition to time management and complex problem-solving abilities, according to O*Net OnLine. To perform the necessary tasks, they might use laboratory evaporators, signal generators, semi-conductor process systems, spectrometers and computer-aided design software, such as Finite Element Method.

Why transformer rating in KVA? and Generator also?

6 Answers   Bhel, IEEE, Toyo Denki, Toyo Engineering,

Why sometime i receive GCU fault /Excitation voltage loss in my Generator Synch Panel .

1 Answers  

What is the deffirant between EARTH, GROUND AND NUTRAL

4 Answers  

We have 420volts, Diesel gen-sets each 750kva 4nos. we are operating with bus bar duct having 10x150mm for each face 4nos. our question is what is the minimum gap required between each face? is there any satutory regulations?

1 Answers   Alliance One,

Send me Model Question paper for the post Scientific Assistant in NPCIL

0 Answers  

How to calculate the input cable rating for 10kva ups (3phase input and single phase output and also 3phase output, battery rating 65Ah)provide the formula also.thnx

0 Answers   Bhel,

in cvt,there are two windings,1a,1n and 2a,2n.in my one project i use only one winding i.e.1a,1n. the other winding is not in use, so i connect it in open delta and want to close it by ibsertibg thermal resistor. the output of cvt is 132kv/115/sqrt3. plesae tell me exact value of resistor, so i may close it to avoid the resonance phenomenin. send me answer on this email adress please. aetcon-po@aetcon.com

0 Answers  

how can we find of cable capicity in amper?how much ampere withstand by 300sqmm cable?

1 Answers  

which braking is used in traction motor and what is its working send at mukeskumar27@hotmail.com

2 Answers  

from generating station If 400v LT line length is 1000m how much voltage is drop and how do i calculate it? which cable will be use for this line?

0 Answers  

what will happen reduce the transformer voltage from 415v to 406v, is it save the energy,? are this methodis good to reduce the energy.?

0 Answers  

Comparision of Air break circuit breaker, SF6 Circuit breaker and vacuum circuit breaker.

0 Answers   Reliance,