ENVIRONMENTAL ENGINEERING - QUESTION 22.3 : A well delivers 225 US-gallons per minute of water to a chemical plant during normal system operation. (a) Calculate its flowrate in the unit of mega US-gallon per day or MGD. (b) The following formula is written next to the chlorine feed point : (chlorine feed rate, lb / day) = (flowrate, MGD) X (dose, mg / L) x (8.34). If this formula is correct, then what should the chlorine feed rate to be in pounds per day (lb / day) if the desired dose is 2 mg / L. (c) Prove by calculations that the constant 8.34 in the formula next to the chlorine feed point is correct. Let 1 US-gallon = 3.78541 L and 1 mg = 0.0000022046 pound.

Spindle fibres are chemically divison formed of a.)Actin b.)Myosin c.)collagen d.)Tubulin

BIOCHEMICAL ENGINEERING INSTRUMENTATION - EXAMPLE 29.1 : In the application of Theory of Spectrometry in spectrophotometer, let n = N x C x V, V = A x t, e = a x N where n = number of molecules, N = Avogadro's number, V = volume of cuvette, A = area of cuvette, t = thickness of cuvette, C = concentration of fluid in the cuvette, e = extinction coefficient, a = effective area of molecule. (a) By using calculus in dI = -I x a x N x C x dt, prove that ln (I / Io) = -a x N x C x t, where dI is the small difference in I and dt is the small difference in t. I = intensity of light. Io = initial intensity of light. (b) Show by calculations that ln (Io / I) = e x C x t based on the answer in the previous question (a). (c) Find the equation of log (Io / I) as a function of e, C and t based on the answer in the previous question (b).

BIOCHEMICAL ENGINEERING INSTRUMENTATION - EXAMPLE 29.2 : (a) In order to determine the slurry volume (L) in chromatography, arrange the formula using the following parameters : slurry concentration (%), slurry volume (L), settled chromatography medium volume (L), 100. (b) In order to determine the chromatography medium volume (L) in gel filtration chromatography, arrange the formula using the following parameters : sample volume to be processed (L), chromatography medium volume (L), sample volume in percent of total column volume (%), 100.

BIOCHEMICAL ENGINEERING INSTRUMENTATION - EXAMPLE 29.3 : In thin layer chromatography (TLC), let retention factor Rf = (distance traveled by solute) / (distance traveled by solvent). Silica gel is used as stationary phase which is more polar than the hexane solvent as mobile phase. If the Rf values of 3 solutes A, B and C are 1.5, 0.75 and 1 respectively, compare the polarities of A, B and C with reasons.

BIOCHEMICAL ENGINEERING INSTRUMENTATION - EXAMPLE 29.4 : The resolution of separation, Rs for chromatography is given by the formula Rs = (difference in retention time) / (average width at the base). In a chromatogram, 3 peaks a, b and c are found. Average widths W at the bases of the solutes are : Wa = 20 s, Wb = 40 s, Wc = 30 s. Resolutions of separation, Rs for solutes b and c in comparison to a are 2 and 4 respectively. The differences in retention times T for b and c in comparison to a are (Tb - Ta) and (Tc - Ta), Ta = Tc - Tb : (a) Form 2 equations involving Rs as a function of Wa, Wb, Wc, Ta, Tb and Tc. (b) Find the values of Ta, Tb and Tc.

BIOCHEMICAL ENGINEERING INSTRUMENTATION - EXAMPLE 29.5 : The following formula is used as a reference : (analyte signal) / (internal standard signal) = (f-factor) x (concentration of analyte) / (concentration of internal standard). A solution containing 3 mM of analyte and 4 mM of internal standard gave peak signals of 2 and 3 mamps respectively. Another similar solution containing 2 mM of analyte and 1 mM of internal standard gave peak signals of 1 and 4 mamps respectively. Find the average f-factor.

BIOCHEMICAL ENGINEERING INSTRUMENTATION - EXAMPLE 29.6 : In infrared spectrum, one of the factors affecting peak location is the mass of the atoms. The stretching frequency of a bond connected to a lighter atom will be greater than the same bond connected to a heavier atom. (a) For halogens like florine (F), chlorine (Cl), bromine (Br), iodine (I) and astatine (At), what is their IUPAC group number? Hint : The proton numbers for F, Cl, Br, I and At are 9, 17, 35, 53 and 85 respectively. (b) For the compounds of H-F, H-Cl, H-Br, H-I and H-At, which one has the lowest stretching frequency and which one has the highest stretching frequency? State the reasons.

QUANTUM CHEMISTRY AND CHEMICAL ENGINEERING - EXAMPLE 31.1 : As an approximation, let v = Zc / 137 where v is the radial velocity for 1 s electron of an element, c is the speed of light, Z is the atomic number. For gold with Z = 79, find the radial velocity of its 1 s electron, in term of c and percentage of the speed of light. (b) As an approximation, let A x A = 1 - Z x Z / 18769 where A is the ratio of the relativistic and non-relativistic Bohr radius. Find the value of A.

QUANTUM CHEMISTRY AND CHEMICAL ENGINEERING - EXAMPLE 31.2 : (a) Let | - > = 1 | x > + 0 | y >, | | > = 0 | x > + 1 | y >. Find the value of 2 | x > + 3 | y > in term of | - > and | | >. (b) Let m to be the reduced mass. Find the value of m in term of Ma and Mb where 1 / m = 1 / Ma + 1 / Mb.

QUANTUM CHEMISTRY AND CHEMICAL ENGINEERING - EXAMPLE 31.3 : In photoelectrical effect analysis of quantum chemistry, let E = kinetic energy of electron, p = intensity of UV light, f = frequency of UV light. According to Classical Theory, E = c for all values of f, E = mp. According to Quantum Theory, E = c for all values of p, E = mf + c. In a graph, m and c are constants where m is slope and c is y intercept. If m = 2 and c = 3 with similar value of E : (a) find the value of p according to Classical Theory; (b) find the value of f according to Quantum Theory.

QUANTUM CHEMISTRY AND CHEMICAL ENGINEERING - EXAMPLE 31.4 : In a rigid rotor model in quantum chemistry, the moment of inertia I is given by an Equation E as I = Ma x La x La + Mc x Lc x Lc = m x L x L, where m = (Ma x Mc) / (Ma + Mc) and L = La + Lc, m is the reduced mass, Ma is the mass of a, Mc is the mass of c, La is the radius of a from point O, Lc is the radius of c from point O. Prove by simplest method that Equation E is wrong.

QUANTUM CHEMISTRY AND CHEMICAL ENGINEERING - EXAMPLE 31.5 : In a wavefunction, let P(x) = A cos kx + B sin kx. By using the boundary conditions of x = 0 and x = l, where P(0) = P(l) = 0, prove by mathematical calculation that P(x) = B sin (npx / l) where p = 22 / 7 approximately, n is a rounded number. A, B and k are constants.

QUANTUM CHEMISTRY AND CHEMICAL ENGINEERING - EXAMPLE 31.6 : In N + 1 Rule in Quantum Chemistry, whenever a spin 1 / 2 nucleus is adjacent to N other nuclei, it is split into N + 1 distinct peaks. In 1 peak or singlet, there is only 1 magnitude. In 2 peaks or doublet, the ratio of magnitude of each peak is 1 : 1. In 3 peaks or triplet, the ratio of magnitude of each peak is 1 : 2 : 1. In 4 peaks or quartet, the ratio of magnitude of each peak is 1 : 3 : 3 : 1. In 5 peaks or quintet, the ratio of magnitude of each peak is 1 : 4 : 6 : 4 : 1. (a) By using binomial coefficients or Triangle of Pascal find the ratio of magnitude of each peak if 6 peaks exists. (b) How many adjacent nuclei are available in a spin 1 / 2 nucleus in such situation of 6 peaks?

QUANTUM CHEMISTRY AND CHEMICAL ENGINEERING - EXAMPLE 31.7 : (a) The correct statement about both the average value of position () and momentum (

) of a 1-dimensional harmonic oscillator wavefunction is =

= 1 - x. Find the value of x. (b) The probabilities of finding a particle around points A, B and C in the wavefunction y = f(x) are P(A), P(B) and P(C) respectively. Coordinates are A (3,5), B (4,-10) and C (6,7). Arrange P(A), P(B) and P(C) in term of a < b < c, when | y-coordinate | signifies the probability.