Why chemical became dominant to natural sources????

is it possible to create a new field  dynamically?

What are the chemical composition of cast iron grade 20

Question - Chemical Engineering Material - In crystal material, hexagonal crystal system could form 4-digit index in certain direction of solid. For [1(-1)0] direction in the hexagonal crystal systems of particular catalyst applied in fume removal of incinerator, what is the four-digit index for this direction? Hint : The transformation equations between the 3-digit [h’k’l’] and the 4-digit [hkil] indices are : h = (1/3) (2h’ – k’); i = - (h + k); k = (1/3) (2k’ – h’); l = l’. A. [(-1)100] B. [1(-1)00] C. [(-1)000] D. [00(-1)(-1)] E. [(-1)0(-1)0]

Chemical Engineering Unit Operation - Which of the sequence below represent a feasible flows of ethanol processing plants using cellulose as starting material? A. raw material --> heat exchanger --> distillation column --> reactor. B. reactor --> distillation column --> raw material --> heat exchanger. C. heat exchanger --> raw material --> distillation column --> reactor. D. raw material --> heat exchanger --> reactor --> distillation column. E. distillation column --> raw material --> reactor --> heat exchanger.

Chemical Engineering Energy Balance - Please match the term A - E as follow with the stated definition : A. Yield. B. Selectivity. C. Relative saturation. D. Molal saturation. E. Absolute saturation. i. Answer : ? (moles of desired product formed) / (moles that would have been formed if there were no side reactions and the limiting reactant has reacted completely). ii. Answer : ? (moles of desired product formed) / (moles of undesired product formed). iii. Answer : ? (relative humidity 40 % means partial pressure of water vapour equals 4 / 10 of the vapour pressure of water at the system temperature). iv. Answer : ? (moles of vapour) / (moles of vapour dry gas). v. Answer : ? (mass of vapour) / (mass of dry gas).

Chemical Engineering Material Balance - Three hundred gallons of a mixture containing 75.0 wt % ethanol and 25 wt % water (mixture specific gravity = 0.877) and a quantity of a 40.0 wt % ethanol - 60 wt % water mixture (specific gravity = 0.952) are blended to produce a mixture containing 60.0 wt % ethanol. The specific gravity of a substance is the ratio of density of a substance compared to the density of water. The symbol of weight percent is wt %. (a) Estimate the specific gravity of the 60 % mixture by assuming that y = mx c where y is wt % ethanol, x is mixture specific gravity. Values for m and c are constants. (b) Determine the required volume of the 40 % mixture.

In a furnace, 2 chemical reactions are happening – 1 mole of solid carbon reacts with 1 mole of oxygen gas to generate 1 mole of carbon dioxide gas; 1 mole of solid carbon reacts with 0.5 mole of oxygen gas to generate 1 mole of carbon monoxide gas. In a given process, 100 kmol of carbon is burned in a furnace. (a) Calculate the theoretical oxygen gas needed by assuming that all the carbon is burned completely to carbon dioxide gas. (b) Calculate the theoretical air needed by assuming that all the carbon is burned completely to carbon dioxide gas and there is only 21 % of oxygen gas. (c) Determine the amount of air required (in kmol) if 50 % excess oxygen gas must be satisfied for (a) and (b). (d) It has latter been found that 20 % of the carbon undergoes incomplete combustion resulting to carbon monoxide gas production. The rest of the carbon undergoes complete combustion. Calculate the total oxygen gas required stoichiometrically based on the actual process.

What is the difference between Mild Steel and Cast Steel with full chemical composition and application details.

DAE,

What is the difference between EN 8 and SS410 grade material with chemical composition and application.

DAE,

At 150 degree Celsius, a mixture of 40 wt % Sn and 60 wt % Pb present, forming phases of alpha and beta. Chemical composition of Sn at each phase : CO (overall) : 40 %, CA (alpha) : 11 %, CB (beta) : 99 %. (a) State 2 reasons for the existences of alpha and beta phases for the mixture of Sn – Pb at 150 degree Celsius. (b) By using Lever Rule, calculate the weight fraction of each phase for alpha, WA = Q / (P Q) and beta, WB = P / (P Q) where Q = CB – CO and P = CO – CA.

How do I create controls dynamically (at run-time)?

In a selection of suitable heating equipment for drying of crystals of biochemical, the one of the lowest current consumption will be chosen for safety consideration. Selection is available : (A) 120 V microwave oven 1800 W. (B) 240 V conventional oven 11000 W. Which one should be chosen and why?

what is the chemical reaction of solt and charcoal in earthing?

Shyam Group,

As per is what is distance between two chemical type earth pit

DAR, Dr Reddys,