Answer / chandrasekaran.n

SINGLE MODULE ADDRESSABLE REMOTE TRANSDUCER

IT IS A SMART TYPE MEANS BOTH ANALOG AND DIGITAL
COMMUNICATION ARE POSSIBLE.

Answer / nbk

SELF -MONITORING ANALYSIS AND REPORTING TECHNOLOGY

Answer / sam daniel

Actually there is no special expansion for SMART.
Because,

An expansion is not shorted to give SMART. But the
professionals trying to create from it.

(For example, People can create some expansionS for
INSTRUMENTATION as well.)

Simply they named it as SMART. thats all.

Answer / abilash

Self-Monitoring, Analysis, and Reporting Technology

Answer / nnnnnnnn

Single Modulabe Addressable Remote Trasducer

Answer / sajesh

single modules addressable rangeble transducers

Answer / pretheesh k k

Single Module addressable Remote Transducer

Answer / mustafa ahmad

Single Modular Addressable Receicer Transmitter

Answer / milan

signal modulation of addressable remote transducer

Answer / subramanian,avanam

SINGLE MODULE AUTO RANGING TRANSDUCER

what are the types of a thermocouple

2 Answers  

A PLC is programmed to drive three motors A, B and C as follows : After running motor A for an hour, motor B should get ON and motor A should get OFF. And after running motor B for an hour, motor C should get ON and motor B should get OFF. And after running motor C for an hour, motor A should get ON and motor C should get OFF. (That is, a cyclic repetition with time period one hour) Now, the second condition is: If any motor gone faulty and is tripped, the consecutive motor should get ON and the faulty (tripped) motor should be eliminated from cyclic repetition. The remaining two motors should bear the cyclic repetition of one hour each. (For healthy motor take logic as high and for tripped motor take logic as low) Now, the third condition is: When motor A load(Amps) exceeds 60% of its rated load, motor B should get ON in parallel to motor A. And when both motors A & B are running in parallel, and if their load exceeds 60% of their rated load, motor C should also start in parallel to A & B. [Here the cyclic repetition is eliminated, until their loads become normal(40%)] [Take logic high(1) for load at 60% and logic low(0) for load at 40%] Now draw a flow chart or a ladder diagram to fulfill the above condition.

0 Answers   MNC,

How do Foundation Fieldbus works? how the Communication Carries out from Foundation field bus,Field Devices and Controller? Were it's Application in the Field? For Which Signals this is Used? PLease Find this answer for this Question Detaile wise because i want to clear the Concept Regarding Foundation Field Bus,if Possible please attach the link of Document with Contails Diagramatic So that more esier for me.

3 Answers   Honeywell,

The document / drawing that is primarily used in depicting the “Bill of Materials (BOM)” of piping system is the

2 Answers  

what is KV and XV valve

0 Answers  

Dear Friends, we are planning to design Power distribution and Fiber optic in the same cabinet.Like Front side Fiber optic and Rear side Power distribution.Is it any possibility of problem occurs like interference etc? Your answer is highly appreciate.

0 Answers  

What is the Main principle and formula for the steam flow compensation?

2 Answers  

Why the industry's standard current standards are from 4mA to 20mA,not from 0mA or any other range?

3 Answers  

if the neutral and ground of ups voltege are connected together in the source itslef then why the voltege b/w neutral and ground comes positive in some other destination inspite of having earth pit. how can we mimmise this?

1 Answers  

What is the procedure of changing a Faulty Module of Allen Bradley PlC without stopping the Process

1 Answers   Siemens,

why do we use 4-20 ma current why cant o-20ma

6 Answers   Southwest Cheese,

what is the standard of determining opening/closing time of Motor Operated Valve?

1 Answers