Answer / aliya haider

Foundation Fieldbus is an all-digital, serial, two-way communications system that serves as the base-level network in a plant or factory automation environment. It is an open architecture, developed and administered by the Fieldbus Foundation.

Applications:
Two related implementations of FOUNDATION fieldbus have been introduced to meet different needs within the process automation environment. These two implementations use different physical media and communication speeds.
H1 works at 31.25 kbit/s and generally connects to field devices. It provides communication and power over standard twisted-pair wiring. H1 is currently the most common implementation.
HSE (High-speed Ethernet) works at 100 Mbit/s and generally connects input/output subsystems, host systems, linking devices, gateways, and field devices using standard Ethernet cabling. It doesn't currently provide power over the cable, although work is under way to address this.

Answer / balram

foundation field bus is just a cable connection.we can connect 10to15 instruments in parallel from the field to plc rit may be dcs.

Answer / aliya haider

Foundation Fieldbus is an all-digital, serial, two-way communications system that serves as the base-level network in a plant or factory automation environment. It is an open architecture, developed and administered by the Fieldbus Foundation.

Applications:
It's targeted for applications using basic and advanced regulatory control, and for much of the discrete control associated with those functions. Foundation fieldbus technology is mostly used in process industries, but nowadays it is being implemented in powerplants also.

Two related implementations of FOUNDATION fieldbus have been introduced to meet different needs within the process automation environment. These two implementations use different physical media and communication speeds.
H1 works at 31.25 kbit/s and generally connects to field devices. It provides communication and power over standard twisted-pair wiring. H1 is currently the most common implementation.
HSE (High-speed Ethernet) works at 100 Mbit/s and generally connects input/output subsystems, host systems, linking devices, gateways, and field devices using standard Ethernet cabling. It doesn't currently provide power over the cable, although work is under way to address this.

what will be the pressure in tank which has the total level of 2 meters and is filled 1.2 meters ?

4 Answers   Engro,

---

plz send me placement paper of ongc

0 Answers   ONGC,

---

I want to measure level under vaccum by using DP Tx and vaccum vary between -500 to -670 mmHg and process fluid is accetic anhydride if consider process fluid density 1 kg/cm2. how to calibrate Tx ? consider level is 0 to 100 Cm.

1 Answers   CCC,

---

What is the principle of capacitance type level transmitter?

0 Answers  

---

where is a level displacer is used?

9 Answers  

---

Profibus DP is a multi-master system. Would it work on RS-485 4W or not, and justify your answer

1 Answers   EIT,

---

What is the use of temprature compensation?

0 Answers  

---

how to do dynolab wind speed sensor loop test, how to simulate value,i have simulate mA 4-20mA but not responding in DCS faceplate, please kindly advice me any one.

0 Answers  

---

wt is cold junction compensation

1 Answers  

---

What is flow ,level, pressure transmitter ?and units?

2 Answers  

---

Working principle capacitance type level transmitter

3 Answers  

---

what is the way of measuring air flow in air duct?explaim instruments used and DP creation in line?

3 Answers  

---