Interested to Buy Any Domain ? << Click Here >> for more details...
Difference between online and offline UPS?
- 11 Answers
- 27050 Views
- I also Faced
- E-Mail Answers
Answers were Sorted based on User's Feedback
Answer / dolnarayan patel
In Online ups output supply is continuously from battery to
inverter then load but in offline ups battery and inverter
comes in picture when power gets fail.
| Is This Answer Correct ? | 56 Yes | 8 No |
Answer / pawan pratap
IN ONLINE UPS THERE IS A DOUBLE CONVERSION AC TO DC THEN DC
TO AC.SO THERE IS NO INTERRUPTION IN ONLINE UPS WHEN MAIN
SUPPLY FAILS.BUT IN OFF LINE UPS THERE IS ONLY ONE
CONVERSION AT A TIME EITHER AC TO DC OR DC TO AC WHICH
SWITCH OVER WHEN CAHNGE OVER DONE.
| Is This Answer Correct ? | 29 Yes | 4 No |
Answer / swathi
In online UPS, supply to the load is continuous.In offline
UPS there is an interruption of suplly to load for a small
time while switching from i/p supply system to battery.
| Is This Answer Correct ? | 27 Yes | 8 No |
Answer / srinivas..m
In Online ups output supply is continuously from battery to
inverter then load but in offline ups battery and inverter
comes in picture when power gets fail.
| Is This Answer Correct ? | 14 Yes | 5 No |
Answer / mustafa
when the ups system is in floating mode it is said to
online.when supply is off and if the UPS is feeding load
the it a offline UPS
| Is This Answer Correct ? | 32 Yes | 28 No |
Answer / rajan babu
online ups : in this process if the ip volt is vary frm
170vto 280v, its op will be always const as 230v
offline ups: in this process if any ip volt means its
simply direct us the same volt
| Is This Answer Correct ? | 5 Yes | 3 No |
Answer / castelino nithin francis
In an online UPS there is AC to DC conversion using a rectifier, DC to DC boosting and finally DC to AC conversion simultaneously at the same time. Online UPS is in operation and supply power to the load with mains power on.
An offline UPS charges the batteries when mains power is on and supplies power to the load when mains fail.
| Is This Answer Correct ? | 1 Yes | 1 No |
Answer / thuranga
Online UPS is- the ups is connected to power supply and the
equipment is connected to the UPS.i.e ups does 2 works
here,they are:1) give the supply to the equipment.2) charge
the batteries in the UPS from the supply. this is online ups.
offline ups: the supply is connected to the ups and the same
supply is connected to equipment,i.e the supply charges the
ups and also the equipment. then if there is a failure in
the power supply then we disconnect the equipment from
supply and connect it to ups.this is the disadvantage of
this so we shifted to online UPS long ago.
example for the online UPS is: the ups we use for the
computers in our home
| Is This Answer Correct ? | 9 Yes | 12 No |
Answer / amit.sonmale
When ups taking load by equipments,thattimes its onlinebut
but equi.taking suply from bypass line that time ups is
ofline.
| Is This Answer Correct ? | 4 Yes | 9 No |
Answer / saeid
On line UPS connection to the user is automqatically, so
there is an electical interlock between it and power
network . The logic of this inter lock is when power
network is on the UPS is diconnecterd from the user and
when power network is off, the UPS become connecterd to the
user.
In addition, on line UPS are used supply some important
equipment in some applications permanently such as process
computer, PLC or realys in industrial plants.
Off line UPS connection to the user is manually. So when
the power network is off, somebody has to connect the UPS
to the user by closing a breaker or contactor.
| Is This Answer Correct ? | 13 Yes | 33 No |
I am experienced with house and industrial wiring but I don't have any licence how can I apply an licence and which type of licence i can get i didn't complete deee just only experience
Tell me harmfull effects of over voltage,under voltage,spike,surge,transient & noise.
IN A MAGNETIC MATERIAL HYSTERYSIS LOSS CAN'T BE REDUCED TO ZERO. HY?
how to calulate bearing number of any motor ?
How to decide CT & PT ratings for a given transmission line carrying some rated voltage?
What is the male and female contactors.where is it's used and what is the deferent betweens
Dear Sir, we met a disaster with our 62.5 kva genset, after rewinding we informed by our contract engg that due to return current coming in neutral & impropper earthing this happend. But after all set up & load balance we checked & found again we have about 20 to 32 amp return current on neutral. we have 12 airconditioner + 12 mini fridge on single phase line. Pl suggest any idea to solved this problem
Is HT capacitor rating connected directly to motor terminals , related to motor no load current?
why we are used thermistor in motor
Three phase star connected PT transformer primary side one phase fuse is blown what will be the output in secondary side(Secondary side also three phase star connected)
IF we want to replace I/C bay at our 220 kv substation which is of 140 mw load capacity bay to be replaced by 400 mw capacity bay.other than CT(1200/1) what are the other equipment i have to replace.
Can we use a Potential Transformer for Auxilliary Power supply( Spring charge Motor, Lighting etc)?
-
Civil Engineering (5086) - Mechanical Engineering (4456)
- Electrical Engineering (16639)
- Electronics Communications (3918)
- Chemical Engineering (1095)
- Aeronautical Engineering (239)
- Bio Engineering (96)
- Metallurgy (361)
- Industrial Engineering (259)
- Instrumentation (3014)
- Automobile Engineering (332)
- Mechatronics Engineering (97)
- Marine Engineering (124)
- Power Plant Engineering (172)
- Textile Engineering (575)
- Production Engineering (25)
- Satellite Systems Engineering (106)
- Engineering AllOther (1379)
