Answer / sachin bhosle

BMS contains HVAC System monitoring & controls, Lighting
system controls & Monitoring of all other facility
equipments like elevators, escalators, D.G., U.P.S. ,
Energy meters. BMS also does integration with Fire Alarm
systems, Access control Systems, CCTV systems & Public
address systems for better & optimized usage of all these
systems in any situation. It also measures & store data for
strategic planning of optimizing of energy consumption in
the facility.
Now days DDC controllers communicate each other directly on
building LAN & BMS workstation to avoid Supervisory
controller limitations.

Answer / wasif

It contains two types of controllers one is the main
usually mounted in the plant room while other sub main
controllers are mounted in the AHU's. All the controllers
are linked with one anoter. While sensing devices such as
temprature and humidity sensors are connected to each
specific controller. Main panel is attached with a
computer.Then all the controllers are programmed and their
parameters can be viewed by the computer attached to the
main panel.

Answer / mohammed mujakar

Building Managment System is a Controlled based system
which instaled in building to Controll and Monitore the
buildings Electrical and Mechanicle Equipment.

Answer / ram kumar

BMS was mainly for less the manpower and save the time.The
router in bms was attached with PC and all the controllers
in all the AHU room's.If the control given from bms room
by PC means the AHU was switched ON.And we control the ahu
cooling system via BMS.BMS mnz Bulding Management
System.Via BMS we check the floor temp by the help of
sensor and check the ups readings,dg readings etc......
by the help of controllers in DDC Panel.

Answer / indigo

Burglar alarms, CCTV
Trace Heating
Other engineering systems
Home Automation System
Fire alarm and Safety system
Manage the sensors of alarm

Answer / mohammed mujakar ( gulbarga, k

Dear Sathis,

First Look at Question i.e. What is BMS (Building Managment System)& is AHU / HVAC are in BMS. (not Burner Managment System)

BMS stands in diffrent form in diffrent feilds like BMS also stans for Buissiness Management System so on.

Ans:
Building Managment System is a Automated Controlled based system which instaled in Building/Shopping mall/ Buisness Centre etc. to Operate ,Controll and Monitore the
buildings Electrical and Mechanicle Equipment including Fire Alarm system, Access control, CCTV systems, Boilers trough monitoring system (Personel Comuter).

Answer / anjani lal

very nice for bms

Answer / r.b.singh

BMS was mainly for less the manpower and save the time.The
router in bms was attached with PC and all the controllers
in all the AHU room's.If the control given from bms room
by PC means the AHU was switched ON.And we control the ahu
cooling system via BMS.BMS mnz Bulding Management
System.Via BMS we check the floor temp by the help of
sensor and check the ups readings,dg readings etc......
by the help of controllers in DDC Panel.

Answer / venkatesu

BMS contains HVAC System monitoring & controls, Lighting 
system controls & Monitoring of all other facility 
equipments like elevators, escalators, D.G., U.P.S. , 
Energy meters. BMS also does integration with Fire Alarm 
systems, Access control Systems, CCTV systems & Public 
address systems for better & optimized usage of all these 
systems in any situation. It also measures & store data for 
strategic planning of optimizing of energy consumption in 
the facility. 
Now days DDC controllers communicate each other directly on 
building LAN & BMS workstation to avoid Supervisory 
controller limitations. 

Answer / arun kumar

BMS(Building Management System)which is capable to control and monitoring critical system such as HVAC,Electrical system, FAS,CCTV,PA system and non critical system such as office AC.

State four different types of flow measurement, for gas flow measurement MMSCFD is the common unit expand the unit and specify significance of word S in the unit.

0 Answers   ADMA OPCO,

Can you explain drawbacks between P,I,D & PID controller

1 Answers   JSW, Priya Cement, TPL,

Why we used cage in control valve?

8 Answers  

I faced several time siemens ps2 positioner automatically getting Chang in it's set point direction after auto calibration  So is there any causes biside this or  any  permissives ?

0 Answers  

what is mean by TDC-3000

5 Answers   ADCO,

What is the difference between bench set and operating range i control valve?

1 Answers   Descon,

what is beta ratio?

3 Answers  

䑰ҕ䔈ҕ䖠ҕ䘰ҕ䛀ҕ䝐ҕ䟐ҕ䢐ҕ䥐ҕŹ

0 Answers  

Hi friends, from Aug 4th onwards iam getting spikes for analog inputs in our DCS for a period of 800ms. I throughly checked every thing, finally i found that the DI, DO's from MCC panels shields are terminated in the Signal Earth where Analog Input signals shields are terminated. Is there any problem with this type of termination?. i checked the induction voltage from MCC and getting around 25VAC, please suggest me in this concern. Our plant is 8months old only. DCS is Siemens Make Simatic PCS7, and the transmitters are Yokogawa make.

1 Answers  

Can any one tell me what type of question asked for instrumentation and control interview panel??? pls mail ramashankar.goel@gmail.com

0 Answers  

what is the diffirence between Earth and Neutral

4 Answers  

why pneumatic control signal output is use 0.2 to 1 kg/cm2

3 Answers   Jindal,