Answer / anshul

in callibration primary standard is compared with another
working standard

Answer / sachin

It is the process for determination by measurement or
comparison with standard

Answer / pankaj

calibration is process in which we compare
the operational element with the standard element.

Answer / hehehe

Calibration means a comparison of two certain components
between the standard and the components to be calibrated.

Answer / bert

it is the comparison of two components from which the
primary is your standard (which is traceable to NATIONAL
INSTITUTE OF STANDARD AND TECHNOLOGY) and your secondary
component is the one to be calibrated.

Answer / girish

calibration is a technique which a other(reference)
instrument like txt
which are compared to std instrument or a master piece

Answer / smart

Calibration is when you check or modify the scale or
instrument. As well as in calibration you compare of two
quantities from which the primary is your standard and your
secondary piece is the one to be calibrated.

Answer / raees mansoori

Calibration is a procedure to test the scale of instrument
or its functionality, comparing the operational element
with the standard element to ensure and confirm the
efficiency of the perticular Instrument.

Answer / வி&#29

The procedure laid down or checking the absolute values on a measuring instruments is called Calibration .



"திருவையாறு" -
விக்னேஷ் குமார்

Answer / giridharan

i would like to add up the measured value with true value

hi friends,can u send me the link for downloading Allen_bradley_RsLogix_500_Pro_V_7.0 software with activation file.or how can i find activation file for this.

2 Answers  

how can calibrate pressure transmeeter in the feild ?

1 Answers  

what is RPI and NUT in controlnet networx. what happen if we are increase the NUT of controlnet networx?

1 Answers   Schneider,

how to adjust relay in smart positioner ?

1 Answers   SipChem,

How to calibrate vertex flow meter? How to calibrate mass flow meter?

1 Answers   Chevron,

Guy's need your support,I want to measure closed tank level which is under vacuum -630mmHg using DP Transmitter, tank fluid density 1.38, Tank height is 7ft

4 Answers   icl,

How can i test procedure grounding for CAT-7 cable? Or How can we test procedure CAT-7 Cable Electrically safe?

0 Answers   Tecnimont,

What is the difference between pneumatic and electro pnematic positioner?

3 Answers   TCS,

what is Best Among SINK Or SOURCE Type Design In Digital Signal, Either Iput Or Output? WHY?Can any one..

0 Answers   Accer, Reliance,

what is the essential difference between DIODE and SCR in term of application.

2 Answers   ADMA OPCO,

Why does a pressure gauge installed on reactor, doesn't have any vent line below to release the pressure? Is it any kind of designing mistake or it actually does not require any vent line? And if it does not require any vent line below it then how we are gonna release the pressure built inside the pressure gauge?

0 Answers   Process Control Technologies,

what is AWG?

2 Answers   NTPC,