Specific gravity of Cement? Water?
Answers were Sorted based on User's Feedback
Answer / m sandeep kumar
when i searched in net it showed that the specific gravity
of cement is 3.15 g/cc
| Is This Answer Correct ? | 33 Yes | 5 No |
Answer / nanthakumar.c
Cement, Portland 3.15
Cement, mortar 2.16
Cement, slurry 1.44
Water, pure 1.00
Water, sea 1.03
| Is This Answer Correct ? | 25 Yes | 2 No |
Answer / ashwin
3.15 but it has varriations as per cement quality
| Is This Answer Correct ? | 16 Yes | 1 No |
specific gravity of cement is 3.15 tonnes/cum or 3.15gm/cc
specific gravity of potable water is 1.00
Sea water is 1.03
| Is This Answer Correct ? | 15 Yes | 4 No |
Answer / sachin
cement 3.15 g/cc
water pure-1.00
water sea- 1.03
| Is This Answer Correct ? | 11 Yes | 3 No |
Answer / mushtaq ahmed
we know that
specific gravity=density of material/density of water (at 4degree Celsius)
the density of cement is around 1508kg/cum
and that of water is 1000kg/cum at 4degree Celsius
then it should have been 1.508
but it is 3.150 that i have seen.
| Is This Answer Correct ? | 2 Yes | 2 No |
Answer / r.aravindhan
specific gravity of cement is 3.15 .15gm/cc
| Is This Answer Correct ? | 4 Yes | 7 No |
what is the difference between volume and weight batching and which is better?
Sir what reason the deshuttring of column 1 day after casting and slab deshuttring time 14 days after casting
how did find the quantity of cement ,sand , and aggregate in concreat which is givan by volume
size of the traditional brick is 248*121*71 in mm,but why the size are like this.why the size are not like that 211*154*75 in mm
please describe clear cover in column from stirups to face
what is difference between bending and twisting
whats is the Indian standard ratio for mix design M5 M10 M15 M20 M25 M30 M35 AND M40???
Can i have pumpable mix design for M10 concrete without fly ash with OPC 43G cement?
What is the benefit of making a cantiliver proped.?
7 Answers CCCL, Engineers India Limited,
what is the ratio of m50 grade in concrete block
How to calculate density(dry & bulk) of sand from Sp. ravity value of sand. eg. G=2.5
what should be the minimum cross sectional dimensions of column for any given loads????
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)