Answer / raghuram

PLATE LOAD TEST IS TO FIND THE BEARING CAPACITY AND THE
SETTLEMENT OF THE FOUNDATION.
DESCRIPTION:: A TEST PLATE, SQUARE OR CIRCULAR IN SHAPE,
ARE USED. THE PLATE IS PLACED AT THE PROPOSED LEVEL OF THE
FOUNDATION AND IS SUBJECTED TO INCREMENTAL LOADING.
SETTLEMENT AT EACH INCREMENT OF THE LOADING IS MEASURED AND
A LOAD-SETTLEMENT CURVE IS PLOTTED. BEARING CAPACITY AND
THE SETTLEMENT OF THE FOUNDATION ARE DETERMINED FROM THE
LOAD-SETTLEMENT CURVES.

Answer / sintha sheik mathar as

To define the bearing capasity of soil and settlement for
foundations, before implementing the job site for factor of
safety as per design.

Answer / mohammed aijaz hussain

Plate Load Test is performed to determine the safe bearing
capacity of the soil.

The plate is placed and subjected to gradual incremental
loading. the Settlement at each incremental load is measured
and a Load v/s settlement Curve is plotted. thus the Bearing
Capacity of the soil is determined from the curves.

Answer / suganya

plate load test is the field test to determine the ultimate
bearing capacity of soil.the ultimate bearing capacity is
taken as a load at which the plate start sinking at a rapid
rate.
methods
*bearing plate
*test pit
*loading arrangement
*load increment
*setting of the plate
*settlement and observation
*load settlement curve and ultimate bearing capacity

Answer / melvin

Plate load test is a test carried out at the site to determine the allowable bearing capacity of the soil.A plate of size 0.3 to 0.6m of 25mm thick made up of steel is used.The plate may be square or circular in shape. The pit of size 5 times the size of the plate is excavated to a depth of foundation. A central hole is excavated in a pit on which the plate is placed.With a hydraulic jack, the seating load of 7kN/m2 is applied on the plate.Then the load is applied in increments and settlement is recorded. Then the graph between load intensity and the settlement is drawn,from which the bearing capacity of the soil can be determined by using formula.

Answer / vikash chaubey

plate load test is the very impotent test of bearing
capacity of the foundation soil.
The test used of the construction of how types
of foudation.

Answer / joey m.

Plate load test is one of a many testing method applicable
in the field where the foundation is concerned either on
building structures foundation or road construction. the
exact definition of plate load test are stated in ASTM
D1195 / D1195M or in BS 1377

What is kn measurement?

0 Answers  

If a slab concrete is placed with M-20 grade concrete, actually it has to be placed with M-30. what are the rectifications / measures to be taken after concreting is done.

0 Answers   BARC,

hoe much fine & sourse agregate required for concrete mix of 1: 1.5:3 by volume in Cu.Ft

0 Answers   SOM,

The ff slab casted its thickness 100mm.2nd floor slab will be casting its 300 mm.how we shall be given suppot to that 300mm thk slab.ple way me

3 Answers   Brigade,

what will be density of a cement bag if its weight and volume are 50kg and 1.25 cft respectively???????

0 Answers   AAA, Jain Housing,

we have a crushing plant and our product is experiencing flakiness and elongation over limit for granite. what is the solution to this problem? how can it be avoided and what to do differently? It is not ok for batching plants

0 Answers  

Manpower required for de shuttering of conccrete slab

1 Answers   Ameco,

what is mean by hysd bar?

8 Answers   L&T,

Define aligned dimension?

0 Answers  

What will be the exam pattern and syllabus for j.e post of haryana staff selection commision? Advt no. (02/2015) Some people says it would only be objective type question papers while others say it would be same as ssc (1 objective,1 conventional) ?? Please answer this question it is needfull to all.

0 Answers   HSSC,

How to calculate the quantity of water in cement mortar eg. CM 1:3?

3 Answers  

how much one carpenter can doing shuttering of slab in one day

0 Answers   Vishwakarma,