Answer / rambabu

I am completed b.tech civil engineering I can face an interview so what are the questions asking possibility tell me&also how to face interview

why are you joining in this (applied post) job and your aim for this job

0 Answers   APPSC,

---

please give the detail design for the soring and shuttering for 8.5m deep excavation in the sandy soil for 25x10 rectangular streaches

0 Answers  

---

100mm block work 64 bags of cement used 150mm block work 286 bags of cement used 200mm block work 20 bags of cement used patly work (M15) 293 bags of cement used mortar ratio is 1:5 how to calculate volume of sand in cum & no. of bags

0 Answers  

---

1.(a.) how do you calculate the volume of mortar for 1 piece of block 450mm x 225mm x 225mm. (b.) calculate for 1sqm

1 Answers  

---

1)How to calculate concrete cube testing load by area in mpa 2) in kg/cme also

1 Answers   SLEC,

---

How Much span required for 1 sqm of shuttering(Beam & Slab)

2 Answers  

---

Explain the benefits of using standard terminology in the measurement process?(Tendering and estimation)

0 Answers  

---

what is the comprasive stranth of brick

3 Answers  

---

How to check Diameter of Np2 rcc pipe?

1 Answers  

---

how to convert udl into point load??

1 Answers  

---

If the first roof slab is not deshuttering in this time shall I start column raising work in second roof is it correct or not

2 Answers   Al Fara, Unity Infraprojects,

---

5. Two long boundary walls run parallel to each other at a center to center distance of 1 meter apart. The width and height of the first wall are 0.30 m and 2.5m respectively. While those of the second are respectively 0.18m and 3.5m. Plot the distribution of vertical stress intensity due to walls on a horizontal plane, 1m below ground level. The walls have negligible depth of foundation and are made of brick masonry (y = 19.2 kN/m cu)

0 Answers   KIOCL,

---