I have compare C2H2-air and C2H2-N2O flame AAS on determination calcium. Both use same range of std to plot calibration curve. (2-6ppm) When i measure the sample with phosphate, KCl and LaCl, C2H2-N2O flame give false positive result, around 0.5ppm. When i measure the sample with phosphste, KCl and EDTA. C2H2-N2O flame also give 0.5ppm false positive. But both above mentioned sample would not give false positive when measured by C2H2-air flame. What is the reason?

0 Answers  

---

signifcance of detector lenearity in calibration f hplc

3 Answers  

---

in calibration of disintegration test apparatus why cycle limit is 28-32?

2 Answers   Caplin Point,

---

What is the difference of time between two consecutive injections in HPLC?

2 Answers   Nectar Lifesciences,

---

What is the diference between residual solvents and organic volatile matter

0 Answers   RA Chem Pharma,

---

In the isomers,enantiomers give the only physical properties present such that no chemical properties present.

0 Answers   Laurus,

---

what is the results if we use ODScolumn instead of BDS column ,(ther parameter is same for column) in assay method ?

3 Answers  

---

As per USP u/vacuum means (how much vacuum should be applied)?

1 Answers   Mylan,

---

suppose i give three compounds A,B,C how do u calculate assay of those three componds which method do u prefer

5 Answers  

---

In standard weight box used for calibration of analytical balance there are two numbers (Qty) of 20mg, 200mg,2.oGM weights. Why?

2 Answers   Orchid,

---

How to prepare 10% HCl from 36.5% HCl solution.

5 Answers   Dr Reddys,

---

[3/30, 13:29] Manoj P Venkatpurwar: How hplc column selection according to structure? How mobile phase buffer selection on molecule structure?

0 Answers  

---