Answer / chandra selvan

It is the branch of engineering which deals with the
measurement, monitoring, display etc., in short
Instrumentation is the study of Instrument.

Answer / chinmaya chihnara

Instrumentation is the one branch of engineering which deals with measuring and controlling the process variables.The industrial process variables are pressure,temperature,flow,level,etc.
The technology of using instruments to measure and control the physical and chemical properties of materials are called instrumentation.

Answer / pankaj rathi

Instrumentation engg. is a branch of engg. which deals with measurement and control the physical & chemical properties of materials.

Answer / mohamed rafik

Instrumentation is define as measured and monitor the parameters and calibrate the instruments.

Answer / om prakash khairwar

It is the branch of engineering which deals with the
measurement, monitoring, display etc.,



different ans is actually instrument is the eye and brain of the plant.
Suppose cut in our legs bt our eyes and brain only see and think and need hands for etc work.... So ans is clear instrument only sense and operator think what is the problem ... Mechnical... Instrument... Electrical and process problems.

Answer / ashish namdev

Instrumentation is automation
then we can run any equipment safe mode, remote controlling
all is automatically 
  





Ashish Namdev (sr. engg)
Jaypee power plant, Bina (MP)

Answer / hafiz waqar ahmed

instrument is a techonolgy in which instrument use to measure and control to physical and chemical properties of materiel is called instrument.

Answer / rathinavelu.k

Instrumentation is define as measured and monitor the Display unit...

Answer / kranti

Instrumentation is a branch of science which deals with the
measurement, monitoring, control of the process parameters.

The instrumentation is mainly used to get maximum quality
and quantity.

How much flow is passing through 6 inch line? There are no gauge, no any transmitters in line.

3 Answers  

Good Evening all.My question is - For a feed water line to an equipment if i need to measure the flow we will use orifice /magnetic/vortex depend on cost/spec.If i need to measure a ''Alarm''signal and ''Interlock'' from one point i think we can use orifice type in one location with 2 different tapping points - one for alarm and one for an interlock to flow valve..If in case i need to have both these signals(Alarm & interlock) from magnetic flow meter,is it possible??will 2 seperate sensors will be located inbuilt r we can program it ??..i thk we can have one transmitter with these 2 signals...need to know any technical issues are there?pls clarify

3 Answers  

radial & axial vibration sensor output voltage is ac or dc volt?

8 Answers   Vedanta, Voltech,

In vortex flow meter how can measure the frequency of vortex generated by vortex flow meter

4 Answers   Cadila,

What are the charecterstics of control valve.

2 Answers  

How to Calibrate Flow Switch in field

0 Answers  

why we cant transmit the dc current easily

1 Answers  

what is difference btween rotameter and orifice plate?

3 Answers  

(1) In turbine, what does term CDP, NI, NH, HSSOC, means. (2) What is the purpose of LO overhead tank in turbines.(3) An equipment is certified for EEX, IA, IIC,T6, what do you under stand by this.(4) what is SURGE, and how it is prevented, what is the purpose of bypass valve across AS valve.(5) Give 2 application of quartz crystal used for process parameter measurement.(6) what is meant by cold float of compressor shaft. (7) state four different types of flow measurement. For gas flow measurement mmscfd is the common unit. Expand the unit and specify significance of word S in the unit.(8) what is meant by Gap voltage, in vibration measurement. Normally how much Gap voltage is set and state the reason.(9) what will the new flow factor if D/P transmitter is Re-Ranged from 25” wc to 50” wc.(10) what is the usage of QDV & Volume booster.

0 Answers   ADMA OPCO,

what is the advantage of submersible level transmitter compare to ultrasonic level transmitter?

0 Answers  

what is the working principle of hydra step(electronic level indicator)?

2 Answers   Bengal Energy, Lanco,

what is positive displacement meter.

1 Answers   Takreer,