plz tell me
one brick total plaster area?
Answers were Sorted based on User's Feedback
Answer / pravin
bricks r usually use more ways as our wise
1. 7.5 grade brick have 6 faces
190mm x90mm x90mm
7.5" x3.5" x3.5"
area =3.5x7.5 x4=0.72sft
=3.5 x3.5 x 2=0.1687 sft
totally =.889sft in 7.5grade brick
Is This Answer Correct ? | 19 Yes | 7 No |
Answer / pravin
actually in this qst have more answers
we can use the brick in to more ways that is 9" wall ,4.5"wall
3" wall and more as our wise ...........
qst is total plastering area we can plaaster the brick in all surfaces that is 6 surface thats y i answerd like that if they mention the qst i will do it needful ........
it a commom qst so we must ask the interviewer to wer u mention the qst ? first and may it answer
thanks all
Is This Answer Correct ? | 8 Yes | 1 No |
Answer / vijay patel
standard size of one brick 20cm*10cm*10cm=.2m*.1m*.1m
so area=2(side)*.2*.1=0.04m2
Is This Answer Correct ? | 7 Yes | 2 No |
Answer / santhoshkumar
Brick size (Indian stranded Brick size)
L = 0.230m
B = 0.110m
h = 0.070m
4" Wall = 0.230m*0.070m (l*h)
= 0.0161m.sq * 2 time (Two Side plaster)
4" Wall = 0.0322m.sq(Plaster Area),One Brick
9" Wall = 0.110m*0.070m (b*h)
= 0.0077m.sq * 2 time (two side plaster)
9" Wall = 0.0154m.sq (Plaster Area)One Brick
Is This Answer Correct ? | 3 Yes | 0 No |
Answer / kallagunta srinivas
used 19cm*9cm*9cm size of bricks
the plaster area is 0.0846sqm
Is This Answer Correct ? | 2 Yes | 2 No |
Answer / a.kaiyum shaikh
Brick size 9"x4"x3", Calculation1=9"x4"x2side=0.495 sft C2=9"x3"x2side=0.375 sft C3=4"x3"x2side=0.165 sft total=0.495+0.375+0.165 = 1.035 SQ FT TOTAL=1.035 SQ FT
Is This Answer Correct ? | 0 Yes | 0 No |
for gravel roads in India to get 1feet height how much height we have to fill
how to calculate 1:2:4 ratio concrete cement, sand, metal and water please give me brief calculation
34 Answers Call Centre, CCCL, Oracle, RLM, RPP, Sunanda Infra, Sunrise Enterprises,
What is the density of cement?
Definition of plinth beam & Uses.
what will be the cost of constructing a plinth of (40x40x4)ft and a PCC layer of 4 inches?
why we provide bent up reinforcement bars at l/4 ? if it is because of diagonal shear , how does it acts ?
During estimation of walls of superstructure...which unit we'll use with quantity.cube or square
200mm*200mm thick block work 1sqm how many cement bags
Why M15 is replaced by M20 when ammendment are made in IS456 in 2000?
in which code refer the change of reinforcement dia defer to drawing . i.e. 12mm dai into 16mm dia.
Write down a formula to calculate the number of 50Kg bags of cement for moulding of cement blocks of tcm thick by 20cm high by 40cm long on site with a mix ratio of 1 bag of cement to 3 wheelbarrows of sand . the sand is measured at a STRUCK( WATER LEVEL) 65 litres capacity wheelbarrow. TEL: +237 674630019
what is the use of dowels rod..?