Answer / limna

a brushless generator is an alternator.i.e,an ac generator. since ac supply is given to it,there is no risk of spark formation due to commutation.hence brushes are not required.

Answer / k.prakashchandra

In normal generator, DC supply to the rotating field given
with help of collector (slip) rings and brushes.In brushless
type the rotating armature of AC excitation gen is coupled
to rotor of the main gen ,and DC is supplied to field of the
main gen by converting AC output with rectifiers fixed on
rotating shaft.The field voltage to the main gen is varied
by varying the field excitation of the exciter.

what is the difference between "Rotary bypass isolation switch and Normal bypass switch" pls share indepth techs?

0 Answers  

---

Is it possible to operate a synchronous 2-poles turbogenerator with a still-in-place faulted bar but electrically disconnected ???? If yes, should I act on the other phases as well ???

0 Answers  

---

why in transformers voltage given is in the multiple of 11

3 Answers  

---

Relation in between KWH & KVAH for Electrical consumption unit & how we can relate if KWH is lower than KVAH

11 Answers   Deepak Fertilisers, Torrent Pharma,

---

2. If 8.35%Z means the percentage impedance of 132/11kV transformer self,will like to reconfirm the percentage impedance that is supplied from power company?

2 Answers  

---

why most of the substations are rated in multiples of 11?

4 Answers  

---

If 22 KV HT line, Current transformer is 25/5 then how to calculate multiplying factor.

0 Answers  

---

if i conncet ct with ct ratio of 600/5 to an energy meter having ct ratio of 100/5, the reading show by the meter will correct, if wrong is there any method to calculate correct value with shown value, if yes please state it.....

2 Answers  

---

what is starting current and use of starting current?

3 Answers  

---

What is the basic difference between earthing, ground and neutral?

11 Answers   Balco, Cognizant,

---

define reflection method?

0 Answers  

---

why the desirable efficiency for a motor is 60%, but in case of transformer, it is above 90%?

1 Answers  

---