In our generating power station we get electric shock in
the battery bank, what will be the reason?
Answers were Sorted based on User's Feedback
Answer / raj
if we touching +ve and -ve together sure we ill get shock...:)..if charging unit is connected to bank and touching any one of the pole that time also we ill get shock..bank is always charging by 3 phase battery charger.
| Is This Answer Correct ? | 0 Yes | 0 No |
How core saturation effects the secondary voltage (whats the theory) of a current transformer in service?
Keywords: Die, Card, Coin, B/N 2 To 12
plz tell me about for how many rating (for 500kva)how much current taken?
How i measured Bus bars weight without wighting ?
Why all voltage level are multiples of 11, like 220V, 440V, 1100V instead of 200V, 400V, 1000V?
9 Answers Indian School of Mines,
What is given by the definition in BIL IMP/PF = 950/395 kV. This was found in a name plate of a power transformer.
What kinds of decision are made about CT from it's Knee point(voltage & current)?
Why thwe Direction of Rotation of a TABLE Fan & CEILING Fan are different?
Why we are designed only 11Kv and 6.6Kv Alternators, not 33Kv Alternators and Power Transmission side we are designed only 220kv, 120kv, 66kv, 33kv, 11kv, and 440volts, not 20kv, 50kv, 100kv.
give 5 differences between relay and contactor
A motor works on 30 killo watts.how much ampers will be required if it works on 440volts?
How to check the Bushings of the transformer?
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)