Why not instal the NGR in 11kv/433kv trasformer?
Answers were Sorted based on User's Feedback
Answer / mahesh sali
as per IEC norm the protection of 11 kv generator against
the earth fault current will be controlled by adding
external resistance between the star point of generator
winding & earth pits.
but for low voltage as per IEC has recommeded solidly
earthing system as per std.
Is This Answer Correct ? | 1 Yes | 0 No |
In my company we are generally using NGR for the secondary
side (433Voltage) of the Transformer....
Is This Answer Correct ? | 0 Yes | 0 No |
what are the ratings of sockets?
If We are converting the SINGLE PHASE AC into THREE PHASE AC by using STATIC CONVERTERS , then How do we bring the frequency to 50 hz??
what happenes if two voltage source connected in parallel will be connected to load.
why do we generate sinusoidal ac?can we generate some other waveforms by alternators?
Metal covered multiconductor cables shall employ a marker tape located within the cable running for its complete length in lieu of cable surface marking. Is it true or false?
what is transient earth voltage
Two electrically operated Vibro Motors are fixed in parallel direction in vibrating feeder. What is the direction of both Vibro Motors?
what is volt drop formula?stm
what are the usual topology of transformers at different substations in the power system and why that particular topology is choosen. what are the limitaions of that topology?
during parallel operation of two ac generator which condition must match before taking both parallel i.e speed /voltage rating /kva/exciation
how to choose the cable rating for load (KW)? EXAMPLE.50KW load
14 Answers ACC, NCUI, Polycab, PowerSol, Siemens, SW,
Show formula which gives full load current 4.8 amps of a 3 HP motor and 27 amps of a 20 HP motor having 3 phase 460 volts, 0.8 Pf.