What is the basic difference between Latches and Flip flops?
Answers were Sorted based on User's Feedback
Answer / hema
Latches are transparent and flip flops are non transparent is simply define.
| Is This Answer Correct ? | 0 Yes | 0 No |
Answer / faizan
latch is a device which is used for switching & f/f is used
for storing the data.
| Is This Answer Correct ? | 0 Yes | 1 No |
Answer / mike chizinga
FF are edge triggered,the state of output is determined by
the clock whilst latches are level_ triggered and the state
of output is determined by the inputs
| Is This Answer Correct ? | 0 Yes | 1 No |
Answer / shyam
LATCH - A memory cell that stores one bit of information.
FF - When additional control input is provided to latch it
becomes flipflop
| Is This Answer Correct ? | 0 Yes | 1 No |
Answer / kamal
latch has no clock pulse.
flip flop has clock pulse.
| Is This Answer Correct ? | 0 Yes | 1 No |
Answer / jaya prakash
flip flop required clock pulse and latch is unclocked flip flop
| Is This Answer Correct ? | 0 Yes | 1 No |
Answer / umair farooq
in latches,edge triggering is used while in flip flop level triggering is used
| Is This Answer Correct ? | 0 Yes | 1 No |
Answer / deepak soni
in my opinion flipflop work in the principal of time
duration by the help of clock where as latches are not and
latches are temperary buffer which hold the information
when they are switch on and flipflop is a signal which
transfer data and informatio and they are not effected or
not changed until next signal is change
| Is This Answer Correct ? | 8 Yes | 18 No |
Answer / rohit kumar jha
FF is edge triggered while Latch is Level Triggered.
Gate is used as control signal for Latch while Clock uesd
as control signal for FF
Latch is a kind of bistable multivibrator have two stable
state can store one bit of information.
| Is This Answer Correct ? | 14 Yes | 25 No |
What is the different between analogue & digital communications system?
Explain the difference between dcs & plc & scada?
Sir how i can resolve my MTI problem ?
Require 7-8 points of difference between cdma ans gsm technology.
Please i would like to know what is the process to add now tapes in ATL. How should i inicialize them?
What are encoders and decoders?
what is ccd
What is Erlangs? What is meant by GoS?
Which type of architecture 8085 has?
What happens when a voltmeter is connected in series with the circuit?
Why does mode in arm in cpsr have 5 bits instead it can have only 3 bits to define all the 7 modes?
the configure that is worst effected by ?
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)