what r the checklist while installing 500 kva transformer
No Answer is Posted For this Question
Be the First to Post Answer
What is the difference between tie bus and bus coupler?
define displacement & magnitude ?
what is the difference between neutral and earth
What is the basic difference between 90% stator earth fault and 100% stator earth fault, and its phenmenona?
There is 3phase power cable from 1 point to the other point which is 100m away. Two point equipped with power meter and recorded 1st point is 205kW while the 2nd is 202kW and each phase average carry 400amps. To calculate the resistance of the 3phase power cable, is the formula using will be P=I2R?
for 100 HP Induction motor service factor is 1.2(SF) we placed a VFD at the motor side load is balance with 0.3 Amp's Phase to Phase but at incoming of VFD load is un-balance with 10 to 20 Amp's what will be cause of load un balance
What is the rotor frequency of 10 Hp 1440 RPM 50HZ 415V ?
what will happen when a electric bulb is connected between two phases.it will glow or not
We have 250 KW x 2 motors, which are load from 25% to 100% varying load in every minute , so how can we compansate the power factor. pl give your opinions on the above subject.
What kind of maintenance is conducted for generator
distribution transformer de-rating formula on over limit iron losses
Why soda is added with water in Lrs of Sliipring motor…to Increase or decrease resistance of water?
Civil Engineering (5086)
Mechanical Engineering (4453)
Electrical Engineering (16638)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)