Answer / karthikeyan

because of carona effects

Answer / dinesh

Blueish colour around conductor & Hissing sound is appeared
due to corono

Answer / sunny

corona is the right answer

Answer / koti

Plz study corona effect . then u will come to know.
ionisation of gases will happen and causes to move the
electrons randomly in all directiond and collides with
other molecules continuosly causes the humming noise.

Answer / xyz

Because of ionization of nearby gases

Answer / nagaraju

when transmission voltage exceeds 30kv/cm breaking voltage
occurs due to this ionization will take place around the
conductor follwed by hissing noise ,color appearing ,light
glowing finally corona

Answer / rajesh

whenever voltage in lines exceeds breakdown
voltage(depending on weather ,fouling)the air surrounds
conductor is getting ionized with bluish colour and random
movement of electrons the collision of electron causes a
circulating current in air and produces sound

Answer / dudeblore

Due to Corona Effect.

Answer / vikrant

corona is basically due to the ionisation of air near the
conductor, whose diameter is very small as compared to the
distance between the conductors.hence air near the
conductor ionises and ozone gas is evolved and it produces
a hissing sound. corona efect can be seen clearly during
night.

Answer / jeny

Due to corona effect

Determine the minimum cable size for a 28A single phase final sub circuit originating from the distribution board supplied by three phase submain. The route length of the final sub circuit is 54 m. Assume 1% voltage drop in the consumer's mains. Submain specification: Cable: 50mm2 4 core V75 copper; Route length 42m; Maximum demand 135A per phase

1 Answers  

what is meant by oil filled power & distrubution transformer ? if anybody know the link of detail about above transformers means plz send it i have interview on this week ? plz help me

3 Answers  

Why in metering Ct for ammeters ct secondary side is grounded for each Ct but not in case of CBCT (Core balance current transformer)..kindly some1 highlights the reason..is it because net flux is zero?

0 Answers  

how can we minimize the off load losses of a distribution transformer which is required to be energized 24x7 ?? capacity of the T/F is 1250 KVA and off load losses are around 2.0 KW.. can we use capacitor bank at the secondary of such a T/F to overcome off load losses? please elaborate briefly...thanks

2 Answers  

Your B.tech marks is being given in CGPA grade. How is it calculated?

1 Answers  

As per is what is distance between two chemical type earth pit

2 Answers   DAR, Dr Reddys,

difference between shunt coil and tripping coil

8 Answers   GE,

How to model "to find the cube root of the given number" in Matlab Simulink ?

1 Answers  

when a primary current injection test is required, it is accomplished by what?

3 Answers  

what relation between transmission line & communication line?

1 Answers   NTPC,

The rating of Transformer are 11KV, 22KV, 33KV instead of 10KV, 20KV & 30KV?

2 Answers  

How can you measure the signal from the PT100 sensor?

1 Answers