I have lowered a submersible pump having 100 LPM discharge &
130 Mts. Head, 15 HP rating on borewell. After lowering 108
Meters, It is taking 39 amps & blowing the fuse. Can someone
put light what is the cause behind it ?
I think water level is high . Reduce the discharge as the motor is overloaded . Provide a valve on the delivery pipe to control the discharge
| Is This Answer Correct ? | 0 Yes | 0 No |
how can we change the supply voltage?
does the Trivector Meter of three phase automatically takes care of the low power factor and gives the reading accordigly or it does not take care of the Power factor while giving the readings please explain
why in generating station generation voltage is 11 kv
why do we have another cartridge filled with oil fitted at the bottom silica gel cartridge in power transforers
if negative of DC supply used and positive is grounded through EGB, and if ELCB used in the system then is it sense the positive volatge and get tripped is it possible?
how the earhing is done on ship and airplane.
what is the maximum load sutiable from earth to phase and what is the max voltage earth to phase suitable
If the battery is in charging condition means, battery is which type of load? Capacitive or Resistive load?
as per BIS supply voltage in India is ......
what is grounding & what is the value of groumding rod 2.5m?
How to calculate D.C load current?
after applying C-License in how many days we get it?
Civil Engineering (5086)
Mechanical Engineering (4453)
Electrical Engineering (16638)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)