Answer / sumit rathore

mixie uses Universal motor which has very high speed
15000-18000 rpm true

Answer / natarajan

YES this is around 18000 rpm

Answer / shanthini.pr93

18,000rpm

Answer / aladdin

what does mixie mean pls.?

Answer / rajesh

i hope it is from 500 to 1500 rpm
it cannot be 18000 rpm , we are not driving car

for switch in 1 position it might be 500
2 - 1000 , 3 -1500 rpm

where we use compound motors in real time and why?

2 Answers   TATA,

---

what type of protection used below 132KV feeders

11 Answers   APTransco, Telecommunications, wbsedcl,

---

HAI,HOW TO SET THERMAL OVERLOAD RELAY FOR DOL STATRTER FEEDER AT START AND RUNNING?

4 Answers   L&T,

---

why we use star and delta connection?why we donot give the supply directly?

12 Answers   Hitech, Siemens, Tata Steel Limited,

---

what r the safety measures in UPS ? explain all?

0 Answers   Wipro,

---

---

what is Aircraft earthing and what does it do?

6 Answers  

---

can anybody send me syllabus of rrb section engg (electrical). and also send previous question pepar...

0 Answers   GKB,

---

How to run 1ph motor(230 VOLTS its full load amps is 4.5 ampa))with 480 volts main(we didn hav neutral)Thn we go for step down transformer.Our load 10 amps,so we conisder this amps in primary are secondary side?

1 Answers  

---

Is it possible to convert Dependent sources to its equivelent current or voltage Sources ?????

1 Answers   Zen Technologies,

---

I have 800 Amps MG Fix type breaker It is in on line & it has been given only UV (under voltage)coil connection for tripping purpose.now it is not working properly means its getting tripp so how can i replace it or how can i rectify the problem without destrubing my load??????????

2 Answers  

---

advantage of motor design on higher power factor . normally motors are designed for .8 power factor. what is advantage of designing at .88 power factor

0 Answers  

---

Metal covered multiconductor cables shall employ a marker tape located within the cable running for its complete length in lieu of cable surface marking. Is it true or false?

0 Answers  

---