what is diff b/w electrical & electronics ?
Answers were Sorted based on User's Feedback
Answer / bivash roy
When Currents flows through conductor, is called Electrical.
When Currents flows through semi-conductor or vaccum, is
called Electronics.
Is This Answer Correct ? | 37 Yes | 8 No |
Answer / sravan kumar
electrical deals with high power where as electronics deals
with low power & its main function is for controlling
various operations in electrical field.
Is This Answer Correct ? | 21 Yes | 3 No |
Answer / d.g.k.shekhar
Electrical deals with high voltage & low frequency,but
electronics deals with low voltages & high frequencies.
Is This Answer Correct ? | 8 Yes | 1 No |
When current flow due to movement of electrons only then it
is called electrical.Ex- conductors
and when the flow of current is due to the movement of
electrons as well as from holes then it is called
electronics.
Ex-semmi-conductor
Is This Answer Correct ? | 2 Yes | 2 No |
Answer / sk rafiquil islam (kaithi,jamu
electrical deals with big component & electronics deals with smallcomponent
Is This Answer Correct ? | 0 Yes | 0 No |
Answer / vinoth
study of electrons is called electronics...
study of movement electrons is called electrical...
Is This Answer Correct ? | 2 Yes | 14 No |
What is the ratio of true power to apparent power in an ac circuit?
What is mean by spike arrester(Voltage Operated)
What are the probable causes for failure of heating elements
I have 4 DG set with 1500KVA rating. system breakers are 11KV & alternator are 415 Volts. i want to Know what is max. resistance for body earthing & 415 & 11KV V Neuteal earthing. my fault current is 14 times for 2 sec.
if you are in a software company,then why do you want to come in a core company like sail, ntpc(where lots of trouble like tension but you have a good life in a it company) ?
how generator generates electricity?
in Contactor opearation Why there is a difference in the values of the operate and release voltage in case AC supply
Why High voltage are generate noise ?
the input mechanical power of a single alternator is increased,its RPM increased but in case of an alternator synchronised with grid its RPM does not increased with increase of input mechanical power. why?
1) why a dg set shows variation of power factor and load when synchronised with other dgs? 2)Why the load sharing is not become equal in all dgs?. 3)When a dg set will not run on auto start?
OHMS LAW
Essential condition for parallel operation of two single phase transformer is that they should have same A polarity B kVA rating C voltage ratio D % impedance