Answer / manoj

We will first force the drum level through DCS by taking it in manual mode. Then we will check the transmitter, rectify the problem and again bring back the transmitter to normal mode(auto mode)

Answer / rao

first we have put the level transmitter in calibration mode
and cross check in level gauge glass and take the feedwater
control valve in manual mode to maintain the drum level and
then check the 3 level transmitters .

what is difference between accelerometer vibration sensor and proximity vibration sensor

3 Answers  

---

why fuse block is not used for AI signal?

0 Answers  

---

What is BMS (Building Managment System)& is AHU / HVAC are in BMS.

12 Answers   Alghanim,

---

䑰ҕ䔈ҕ䖠ҕ䘰ҕ䛀ҕ䝐ҕ䟐ҕ䢐ҕ䥐ҕŹ

0 Answers  

---

What is difference b/w absolute & gauge pressure? EXPLAIN

2 Answers   IFFCO,

---

What is Cu-100 and Cu-1000 ? and tell me its application ?

2 Answers  

---

How can we loop powered for a transmitter.How we can do wiring

1 Answers  

---

Why we. Don't measure current in parallel? Why we measure current in series and why we measure voltage in parallel only?

2 Answers   Almeer Technical Services,

---

what barrier is used in process industry.

3 Answers   ADMA OPCO, Process Industries,

---

Air pressure in a pressure vessel can rise or fall at up to 2.5kpa/s.The pressure is sampled every 0.5 seconds.If range of the the pressure indication is 0 to 1500 kPa, what is the max value of the error due to sampling in % of Span

2 Answers  

---

what is the differnt between open loop and close loop ?

5 Answers   India Cements,

---

uses of profibus?

1 Answers  

---