Answer / shahnawaz akhter

kva meaning its rating in transformer cu loss depend on
current and iron loss depend on voltage not in phase angle
between voltage and current that's why transformer rating
in kva not kw.

Answer / sujeet

Actually, a machine's rating depends on the type of load and
since the load of a transformer can be real as well as
reactive.Hence the rating of the transformer is given in KVA
not in KW( for mechanical loads only).

Answer / bala

There is no fixed load to supply power from transformer.The
load can change at any time thats why kva used.

Answer / neeraj malik

As there are two types of losses in a t/f i.e core losses that
depends on voltage of the t/f and ohmic losses that depends on
current of the t/f.Thats why due to these losses we take the
rating of a t/f in kVA

how power can be saved using VFDs in detail explain

1 Answers  

---

What is the need of generator relay panel

0 Answers   Newell,

---

why the earth pin is thicker than other pins in a plug? If it is for reducing resistance, then why the copper earth wire is not so thick as earth pin of socket?

5 Answers   Omax,

---

In stepdown transformer 11/415 volt two nos.(R & Y)HT side fuse is blown ,what will be voltage of ry,rb,yb in secondary side

5 Answers   NTPC,

---

can anyone give an idea about dia calculation in cold rolling mill

0 Answers  

---

WHAT IS THE FORMULA FOR CALCULATING CURRENT RATING(DIRECT IN GROUND OR AIR) OF ARMOURED(XLPE) CABLE OF 4C,16Sqmm?

0 Answers  

---

how many earthing should need for UPS, where its connected

7 Answers   HCL,

---

why we are testing cables with DC supply not with AC supply?

9 Answers   Aurobindo, DEWA, L&T,

---

how do the stepper motor works.

1 Answers   Vardhman,

---

I have raw material for making Compact-Choke for flourscent lamp of 40 Watts. We are suppose to get 0.4 amps output at end. but we are getting 0.42 or 0.44 amps and above. We have done many testings in different but nothing worked out. Please suggest me how to get the correct output. We are using 1. core winding of 700 windings of aluminium 2. E-shape iron fillings and I-shape iron fillings to surround the winding.

6 Answers  

---

what is the minimum distance between substation wall and LT panel outer surface?

3 Answers   L&T,

---

which protection function should measure RMS value of current&DFT value of current?

0 Answers  

---