Answer / chirag

Triping devices are circuit breaker,mcb,mccb,rccb,elcb
MCB: Miniature circuit breaker
MCCB: Molded case circuit breaker
RCCB: Residule current circuit breaker
ELCB: Earth leakage circuit breaker

Generally for low votage up to 440v mcb are used but when
voltage level is high there is possibility of sparking so
mccb are used in which arc extinguish medium is used.

And for safety porpose RCCB is used which does not sense
overload but sense unbalance current of each phase.

Answer / answer seeker

tripping equipment are 
1.mcb
2.mccb
3.rccb
4.elcb


mcb  : " miniature cb " the advanced type of fuse(0.5-125A
)
mccb : " moulded case cb " 16A -1250A)
elcb : " earth leakage current circuit breaker " for earth leakage protection ( 
rccb : "Residual Current Circuit Breakers " work with earth leakage current sensing ( 30mA-300mA)




if any doubt go to link : http://electrical-engineering-portal.com/what-is-the-difference-between-mcb-mccb-elcb-and-rccb

Answer / mukesh sharma

Tripping devices are circuit breaker,mcb,mccb,rccb,elcb
MCB: Miniature circuit breaker
MCCB: Molded case circuit breaker
RCCB: Residule current circuit breaker
ELCB: Earth leakage circuit breaker.
mcb can be used up to certain level of current it can also
used as a switch but it can Connect only on single conductor
or wire for two or more wires we can use different circuits
manufactured by multiple mcb like Dp,Tp Tpn.
mccb it can be used at three wires for large ammount of
current flowing (above mcb rating) usually above 100A current.
mccb & elcb both are used for human protection but tripping
method of both is different elcb will trip by sensing
cuntunity between phase and earth when ever mccv will trip
if there is a difference in current flowing between phase &
neutral more than or equal to 30mA basically mccb is advance
version of elcb & it is letence.

in my openian mccb is more better than mccb.

how will be the capacitance generated in a earthed wire???

1 Answers  

---

How we can design a cable for a 3phase load.

1 Answers  

---

What will be the voltage impact on secondary side of two transformers with different vector groups when both voltages are compared.

0 Answers   APTransco,

---

need help, please can someone tell me how can i calculate the main breaker and branches breakers to distribution panels (MDB) depending on the load ampere .. i really need it but can't find any site >>

3 Answers  

---

As per IS why should the control be taken only from R phase, why not from B or Y phase??!!

2 Answers  

---

how we calculate electrical load on a building according to area?

0 Answers   HFCL,

---

How much ampere rating on LT side of distribution transformer and also on HT side of 200KVA transformer

2 Answers   ABB,

---

HOW isolation transformer works.

2 Answers  

---

what is the diffrence between earth and neutral.

1 Answers  

---

when we decide to use soft starter drive or vfd drive in mcc to operate apump?

0 Answers  

---

One Township having 850 house and each house load is 2.2KW single phase & 5HP 3 Phase motors of 10 Nos .Who can calculate 11 KV transformer capacity .dilip_bhasker@yahoo.co.in

1 Answers  

---

It is a three inch fan and i want it to rotate to other direction .I've tried cutting the wire and reconnecting them inverse like black to white and white to black ,but it won't start rotating when i plug it in that way.And then it works again when i rejoin the wire to the way it is. I don't know what causing the problem.Is there anyone familiar with these small mortor?Any suggestion would be appreciated.Thanks!! http://i296.photobucket.com/albums/mm163/sasukebloodwheel/110527-105859.jpg

2 Answers  

---