In Fe415 & Fe500,What is mean by "Fe" and "415/500"?
Answers were Sorted based on User's Feedback
Answer / sathish
Fe 415 is not a mild steel it is a high yield strength
deformed bars
Is This Answer Correct ? | 307 Yes | 33 No |
Answer / dhrubajyoti dam
fe 415 & fe 500 is yield strees of deformed bar...i.e 415n/mm2 & 500n/mm2
i.e if 415n & 500n force are applied per mm area then the bar is going back to its original position...
Is This Answer Correct ? | 164 Yes | 27 No |
Answer / udhaykumar
Fe means ferrous material.
415/500 means yield strenth of bar.The unit is n/mm^2
Is This Answer Correct ? | 127 Yes | 17 No |
Answer / prabhuling s. kalburgi
FE - indicates Ferrous.
415 / 500 indicates the Tensile strenth of the Steel.
For example - Fe415 steel will have a strenth of 415 N/ mm2
Is This Answer Correct ? | 99 Yes | 22 No |
Answer / modipraveen
Hi, Fe indicates Ferrous in reinforcement and it tensile
strength should not be less than your represented value.
Normally Fe415 is Mild Steel Its Tensile is 415
and Fe 500 is Tor/TMT steel
Is This Answer Correct ? | 75 Yes | 46 No |
Answer / ibrahim hussaini
Hello Engineers!!
Fe is Iron, simple. the numbers 415, 500, 550 etc denote the minimum YIELD STRENGTH of the sample. it is not the ULTIMATE STRENGTH, which WILL be higher than yield strength.
Hope the answer is satisfactory.
Is This Answer Correct ? | 37 Yes | 10 No |
Answer / jagannath nath
Fe 415 & Fe 500 is yield strengths of deformed bar 415n/mm2 & 500n/mm2
Which is applied minimum strength of iron 415n & 500n force per mm area.
Is This Answer Correct ? | 17 Yes | 1 No |
Answer / amit
Fe=ferrous ,415 =yield strength
Yield strength for mild steel =250
Yield strength for HYSD=415 N/mm^2
Is This Answer Correct ? | 18 Yes | 3 No |
Answer / mmemek-abasi paul
Fe 415 indicates that the yield strength (tensile strength when it is subjected to elongation) of steel is 415.
The abbreviation Fe stands for Ferrous material ie iron from which the reinforcement steel bars are manufactured.
Is This Answer Correct ? | 12 Yes | 0 No |
Answer / arindam ghosh
FE 415/500 or 600 represents the Yield Stress of the Bar.This is the Yield limit of the Bar(Mild or HYSD). The Load applied per Square unit of area of the Bar(Example: 500 N/Square MM)and the Bar tends to bend or Yield.
Is This Answer Correct ? | 12 Yes | 3 No |
Laying bitumen concrete 40mm thick using 0.1372 cum of 13.2 10mm metal ,0.2387 cum of 10 5mm metal...what did it means please explain me how much cum of 10 mm metal need?
Define What happens to Load at yielding ?
what is mean by bulking of sand?
What do you mean by the word 'shear'?
5. Two long boundary walls run parallel to each other at a center to center distance of 1 meter apart. The width and height of the first wall are 0.30 m and 2.5m respectively. While those of the second are respectively 0.18m and 3.5m. Plot the distribution of vertical stress intensity due to walls on a horizontal plane, 1m below ground level. The walls have negligible depth of foundation and are made of brick masonry (y = 19.2 kN/m cu)
Determine the production capacity of a treatment plant for a city of 1,250,000 population. Assume the specific consumption per capita of 15ol/c/d, non-domestic water use of 30,000,000 m³/year, and UFW of 12%.
what is right & short method of measurement of slab&beam
How to convert and use 10mm dia steel 150mm spacing instead of 12mm dia steel which is spacing?
what is the procedure of steel?pleas tell me how we can apply in any home or building?
how many bag of cement needed for concreting 14.93 m3 at the ratio of 1:4:6 and 1:5:6
convert= kg into brass
In Fe415 & Fe500,What is mean by "Fe" and "415/500"?
12 Answers CMR, Modi Builders, Taehwa Enterprises, vvip,