motor is 12.5hp after starting few minets motot get hot?
why?
Answers were Sorted based on User's Feedback
Answer / chetan
12.5 HP Motor gets heated after few minutes dure to the
losses in motor i.e., iron losses coper losses , windage
losses , friction losses and these looses comes into play
on account of resistance present in the motor circuit.
Is This Answer Correct ? | 9 Yes | 2 No |
Answer / baskaran
the following reason for motor getting the hot
1. overload(excess the normal level)
2. low voltage
3. unbalanced current flowing in every phase
Is This Answer Correct ? | 7 Yes | 1 No |
Answer / avd
Please provide following data
1. what is the Current drawn by motor?
2. are the current in all phases are balanced?
3. If motor rotates or not?
4. If stall is due to load, take no load trial.
5. Condition of motor cooling fan. Free on shaft?
6. Condition of bearings. Jammed fully/semi?
Without data no one can analyze your problem
Is This Answer Correct ? | 1 Yes | 0 No |
Answer / k.prakashchandra
Add 2 more 1.bearing faulty 2. improper cooling.
Is This Answer Correct ? | 0 Yes | 0 No |
Answer / subhani
stating time motor has high current consumption thats way
intially heated
Is This Answer Correct ? | 1 Yes | 3 No |
What is the difference between reciprocating & rotary motors in AC units, which is the best one in terms of operation.
why we ht line cable size small rather than lt cable.
In Transformer testing at Shop test we normally test for vector group, open ckt.,short ckt. but what are the other test performed for transformer once it reaches at site.For e.g:if the transformer is dry having rating 1000KVA?
Why is it that polarization index type test is required for MV and HV motors and not for LV motors?
3 Answers La-Gajjar Machineries, Qatar Airlines,
IF we want to replace I/C bay at our 220 kv substation which is of 140 mw load capacity bay to be replaced by 400 mw capacity bay.other than CT(1200/1) what are the other equipment i have to replace.
Why battery rooms painted with dark colour
1 Answers BAL, MSETCL Maharashtra State Electricity Transmission Co Ltd, Polycab,
why we use to always generate power below 16kv.why not at higher voltage?
what is the minimum recommended leakage current of an earthed cable connected to the body or skid of an alternator
Why frequency changes due to load variation in power system ? i.e why when load increases frequency decreases?
what is the difference between arc and spark
What is it mean Transformer 100/133MVA Power Transformer, significance of 100/133 MVA and 230/115KV please
Mechanism of Wye Delta Starter?