whay we transmit power in 3phase no in 4 or 2 or 5......etc?
Answers were Sorted based on User's Feedback
Answer / a k shukla
AC change path called frequency having 0 to 360 degree and
all alternator phase sequence design at 120 degree
differences ie 0/360 - 120 - 240 Degree universal in
3 phase sequence called R Y B
| Is This Answer Correct ? | 7 Yes | 2 No |
Answer / karun
We can transfer power 2 or 3 or 4 phase but we know that
actually power generation is done in 3 phase it is economic.
If we want to transfer 4phase we should generate power from
different generators.
and i agree this answer
"AC change path called frequency having 0 to 360 degree and
all alternator phase sequence design at 120 degree
differences ie., 0/360 - 120 - 240 Degree universal in
3 phase sequence called R Y B."
| Is This Answer Correct ? | 3 Yes | 0 No |
R Y B OR 3 PHASE R N , Y N , B N, OR SINGLE PHASE R Y , BY , YB TWO PHASE ............................................................................................
| Is This Answer Correct ? | 3 Yes | 5 No |
Answer / simon
There is a device namely alternator/Genrator (big size) which genrates 3 Phase supply i.e R,Y,B in max of 11000v or 11kv only in India. Hense the multiple will b always in 3.
| Is This Answer Correct ? | 0 Yes | 3 No |
I just purchased a 4 position cam switch to be used to operate a 3-speed blower motor. The motor is a 10 amp motor and has 3 wires that are used to control speed. The cam switch was rated at 660V 20 amps but when I received it, I noticed that it has AC-15 operational current rating (Ie) of 4/5 amps. If I am reading the label correctly. the 4/5 amps is related to 440v/220V (Ue). Other ratings are AC-3: 5.5A, AC2: 7.5A and AC-4: 1.5A. My questions are 1) Is it safe to use this switch with the motor I have 2) what is the difference between the 20 amp Ith ratting and the Ie operational ratings?
which motor is used in high mast ( street light) & give the hight of tower .
2 Answers Construction, Honda,
why odd hormonics only will effect the power system.why not even hormonics
Can a generator runs after getting 1st stator earth fault.
we can stepdown the voltage from 230/12v ,and we use the voltage for various electronics components why can't we step up the voltage from 12/230v if we can shall we use the voltage for domestic single phase supply
How to calculate multiplication factor in kva example 500kva ans pls ?
What is the difference between generator and turbo generator - related to power gereration
how is classified voltage level in generation,transmission & distribution system?,
Whis machine is having higher efficiency Transformer or Generator
What is differance between alternator and generator?
Do you know the faults occurs generally in motors and how to rectify them?
some practicle study shows that the reactive power at the receiving end is not equal to the reactive power at the sending end.But according to theory the reactive power is exchanged by different parts of the network – capacitors and reactors permanently, but is never consumed or produced. Then Where that reacrtive power loss occuring?is there any formula to calculate reactive power loss?
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)