If 2460 kj/kg of heat is addes to water at o C to produce wet steam at 1500 kpa, what is the dryness fraction?
1 4775Why is the length of cable layyed from RTD to temp. Transmitter should be minimum? Why does heating effect takes place in their?
1 6204What will happen if the Air Preheater is placed before the Economiser?
Bhel, KSPL, Tata Power,
6 10635at work we have a 3 phase motor but on testing one phase isnt getting a reading. it runs 24 hours a day all week. stops and starts well no noise or heating. the phase isnt down to earth.is it just a bad meter reading or not? phases one and three came up with a resistance reading of 0.4 but phase 2 couldnt get anything shows up as open circuit.
iGas,
1613Chemical Engineering Unit Operation - Which of the sequence below represent a feasible flows of ethanol processing plants using cellulose as starting material? A. raw material --> heat exchanger --> distillation column --> reactor. B. reactor --> distillation column --> raw material --> heat exchanger. C. heat exchanger --> raw material --> distillation column --> reactor. D. raw material --> heat exchanger --> reactor --> distillation column. E. distillation column --> raw material --> reactor --> heat exchanger.
1 2530A solar collection has been installed to heat water. A large water tank has a volume of 5.0 x 105 cm3. The area of the solar collectors is 8m2. (2 meters by 3 meters). If the water in the tank starts out with a temperature of 30°C in the morning, what is its temperature in the evening after the sun has set?
194314. What different types of Heat treatment processes and why heat treatment is required?
Amul,
1 4446
Why is post-weld heat treatment sometimes necessary for welded vessels?
What are some good estimates for heat transfer coefficients for coils in tanks?
At which growth stage of wheat maximum biological nitrogen fixation occurs?
What does i. Salt ii. Vinegar iii. Heat iv. Sugar v. Very cold vi. Drying vii. Pressurization viii. Preservatives ix. Radiating do to the food? in regards to preserving food.
while design of heat exchanger,what r the factors keep in mind?
if there is a web table of having row and colmns.a button is placed at 2nd row's 3rd column which is worked for both edit and delete..how to write script for the button to test both operation on the web table using desriptive programing.. plz help me on script wheather using getroproperty Q2)what is the command for taking valiue from a web table in qtp
test cases test wheather window? test cases to test calculaor? test cases to test a reverse string program? test cases to test program{ int.parse(sting str) $return (int)}? test cases to test program{display string length}?
When we are calculating the heat load sheets,why we are not considering the heat developed from the blood in the human body.Also both men & women can't acess aircondition in same way..women feel too cool even at 22 degree,while men can overcome that.
Re: Sugar Cane Bagasse What are the 1. Specific Heat of Bagasse at 50% moisture, 40% moisture and 25% moisture? 2. What is bu;lk density of bagasse at 50% moisture, 40% moisture and 25% moisture? 3. What is specific gravity of bagasse at 50% moisture, 40% moisture and 25% moisture? 4. What is the specific heat of flue gases generated from boiler fuelled by bagasse? 5. What is the specific gravity of flue gases generated from boiler fuelled by bagasse?
2. You are required to prepare a Profit & Loss Account for the year ending 31st December, 2007 and the Balance Sheet on that date. The Trial Balance of XYZ Ltd. for the year ended 31st December 2007 is as follows:- Trial Balance of XYZ Ltd. as on 31st Dec. 2007 Debit Balances Rs. Credit Balances Rs. Materials used 3,50,000 Sales(including 2% Sales tax) 9,18,000 Cost of Labour 1,50,000 Sale of Scrap 100 Stock, finished and work in process on 31st December, 2006 50,000 Rent received 2,000 Wages : Factory Staff 15,000 Discounts 2,750 Directors Remuneration 50,000 Recovered against fire claim re : Stock 5,000 Salaries : Clerical Staff 75,000 Capital : Equity 25,000 Insurances : Workmen’s Compensation 1,500 Preference- 9% 8,000 General, fire etc. 2,000 Creditors 1,56,000 Directors’ Life Insurance 1,500 Provision for Taxation 1,05,000 Maintenance : Buildings 1,000 Profit & Loss Account 13,750 Plant and Machinery 12,500 Rent and Rates of premises and hire of plant 20,000 Heat, Light and Power 15,000 Experimental and Laboratory Expenses 10,000 Canteen Expenses 5,000 Staff Welfare expenses 2,500 Motor Expenses 12,500 Professional Charges 2,800 Postage and Telephone 3,500 Books, Printing and Stationery 11,000 Sundry expenses 10,000 Carriage and Packing on Sales 3,300 Discounts 5,000 Debtors 1,78,000 Freehold Property 50,000 Plant and Machinery 12,500 Fixtures and Fittings – Offices 3,500 Office machinery and Equipment 3,000 Motor Car and Van 6,500 Stock of materials on 31st Dec. 2007 1,20,000 Bank 38,000 Sales Tax Paid 15,000 12,35,600 12,35,600 Depreciation is to be provided at the following rates: Plant and Machinery 10% Fixture and Fittings 05% Office Machinery, etc. 10% Motor Vans and Cars 25% The stock of finished goods and work in progress as on 31st December, 2007 was Rs. 35,000. Provide for preference dividend and ordinary dividend at 10%. The total taxation liability is estimated at Rs.1,50,000 of which Rs. 75,000 relates to the current year. Debtors include Rs. 10,000 deposited as security against government contracts. The Works Manager is paid partly by salary and partly by a commission; he is entitled to a commission of 5% on the amount by which the surplus in the factory cost exceeds 20% of the sales for the period. Charge the commission if any in the Profit and Loss Account.
THIS IS HARI PRASAD. I KNOW THAT HVAC MEANS HEATING VENTILATION & AIR- CONDITIONING. I NEED DESIGN CONSIDERATION OF HVAC UNIT.
Two liquids hot and cold in two vessels are there and an metal bar acts as a conductor of heat between the two vessels. what happens then. what happens after 24 hrs?
wheather the size of windings in motor and generator are the same
In the calculation of calorific value of any fuel why the latent heat of vap. of water is taken as 587 kj/mol whereas actually it is 540kj/mol?
In between UPS out going changer over switch and ups raising main input, both side cable gland producing heat but the cable doesn't get heat,Why?