what's the difference between front and rear wheel drive?on what basis we

what's the difference between front and rear wheel drive?on
what basis we choose the type of drive?

Question Posted / prbalaji

3 Answers
7585 Views
I also Faced
E-Mail Answers

Answers were Sorted based on User's Feedback

what's the difference between front and rear wheel drive?on what basis we choose the type of d..

Answer / v.karthick irt

it depends upon the passengers weight. for heavy vehicles
rear wheel drive is choosed for better stability. In case
of passenger cars etc., front wheel drive is preferred for
high speed and where stability is basically good.

Is This Answer Correct ?

16 Yes

2 No

what's the difference between front and rear wheel drive?on what basis we choose the type of d..

Answer / ronak

basically, if torque produced by the engine is transmitted to front wheel then its a front wheel drive and if to rear set of wheel then its a rear wheel drive...its is decided on the usage of vehicle.. for hard rocky terrains it is usually rear wheel drive or four wheel drive...in 4 wheel drive power is transmitted to all four wheels of the vehicle.

Is This Answer Correct ?

0 Yes

1 No

what's the difference between front and rear wheel drive?on what basis we choose the type of d..

Answer / kandole jimmy

how do you calculate the degree of the roof strucure and
what bassis do you determine the wind whe setting the roof?

Is This Answer Correct ?

1 Yes

9 No

Post New Answer

More Mechanical Engineering Interview Questions

why is heat treatment of steel metal crucial?

0 Answers

Define coal

0 Answers

HOW MUCHSTACK EMMISSION THROUGH YOUR CHIMNEY AND WHAT IS THE STATE GEVINORMS

1 Answers Jindal,

HOW TO PREPARE FOR HPCL WRITTEN EXAM?

0 Answers JK Cement,

What is the purpose of I.O. circulation before and after starting of engine?

0 Answers

what is HVAC?

6 Answers SkyTel,

Why thermal efficiency of i.c. Engines is more than that of gas turbine plant ?

0 Answers

Why pistons are usually dished at top ?

0 Answers

Iam a 2006 graduate and applying for ms degree course in USA for spring 2010.I have also received i20 from universities.I also have work experience as a cad engineer for almost 2.6 yrs. please tell me what kind of questions can be raised by US Consulate for my situation and how to answers them.

1 Answers US Consulate,

Greetings This question is about hydraulics and I request an expert to answer it. A simple hydraulic machine is made up of two heads, a larger one with a larger force inside a wider pipe and a smaller one with a smaller force inside a smaller pipe in width as in the second picture on this link: http://science.howstuffworks.com/hydraulic1.htm The question is this: what happens if the smaller head and the smaller force doesn’t exist but the smaller pipe is high enough to take all the liquid? For example the larger head is 1.00 sqr metre and can go down 1.00m under a weight of 100.00kg. The cross sectional area of the smaller pipe is 0.001 sqr metre. Now when the larger head goes down 1.00m, how high the liquid from the wider pipe can go into the smaller pipe of the cross sectional area of 0.001 sqr metre? Regards

0 Answers

if any one attended caterpillar placement pls send the model questions and the question pattern.....

0 Answers

how to calculate cg of transformer

0 Answers

For more Mechanical Engineering Interview Questions Click Here