Answer / naveen sahariya

starters are used in industries ,i have seen thousands of
motors starting through starters. you have to use
starter ,its type may change like dol,star-delta,soft-
starter,oil-starter,ats.

Answer / pillay

Is your question correct? All motors must be started with some
type of starters what more if they are used for industrial
purpose.
In addition to provide a safe mean of starting and stopping
the motor it should be able to to protect the motor itself.
With the help of a starter you can provide overcurrent and earthfault protection unauthorised starting unwanted stopping
and you can plan your starting and stopping as desired.

Answer / sreenu

As per IE rule, we must use starter for morethan 3KW
motor.So please use starter, otherwise your motor may
burntout due to high starting current.

Answer / milinda

In industry for 3ph IMs starters are used..such as start
delta starter..

Answer / modi.elect2002

In industries starters are used widely. I have seen thousands of starters.
most common types are DOL, Star-delta, Soft starter.

Answer / habib

Answer-3 is absolutely correct.......

Answer / habib

Actually In Industries Every Machine connected to motor
is to be respond as early as posible i.e with in
milliseconds,If u use starter motor has take some time to
take full load.

Answer / sanjeet

starer reduce starting current with adding the external
resistance with the armature in series ,because the
resistance of the armature is very less,so starting current
is very high .
I=V/R if r is less then curent is very high

to reduce the starting curent starter is used.

up to 5 hp motor dol starter is used
but in industries the rating of the motor is if higher
thane 5 hp then starter is not used

Answer / nilkanth

IN industries rating of motor is very high and there is
high voltage is used there for high starting current is
required.thats why starter is not used in industres.

Does the total power means fundamental plus Harmonics?

2 Answers  

WHAT IS THE ANALYSIS OF FREE WHEELING DIODE IN FULL WAVE CONROL RECTIFIER?

1 Answers  

What is the 415V AC Soft starter? Explain with an example?

1 Answers   TCS,

star delta starter contorl circuit... drawing..

0 Answers  

What are the advantages of speed control using thyristor?

0 Answers  

what is the benift of HT metering & LT metering

1 Answers  

What is the usega of brking resistor? and how it will useful to Drive...?

3 Answers  

what is a drive ?

3 Answers  

What is the reasonable voltage between Neutral & Earth of an electrical system for good earthing?

6 Answers   HAL,

can the measured percentage error during calibration of single phase energy meter be negative?

0 Answers  

How many losses in generators? how we can reduce them? and also in motors,transformers?

1 Answers  

Why water bubbles when D.C. Current is passed through it? Why not when A.C. Current is passed?

0 Answers