Answer / jq

To have a line to neutral connection, all you have to do is
to take out one of the leg connected in line to line and
then connect it to the nuetral line.

Answer / vijay

If it is 3ph and star connected, then connect the star point
to neutral. If it is any resistive circuit having connected
to 2phases, then the mid point of the circuit is connected
to neutral and the other two ends will be connected to
phase, which forms a line to neutral connection.
One more option is that, the line to neutral voltage is made
similar to the line to line voltage than it can be connected.

Answer / gokul s rathore

Line-to-line means delta connection, we can short all of
three phases at one point by looping, for making neutral
point (if we can off the supply for some time) now we have
line-to-neutral connection.
The 2nd method is by using one star-to-delta transformer,
having equal no of turns in both of windings.

Answer / siddharth

making artificial neutral using ngt.

Answer / gokul singh

By using one star-to-delta transformer, having equal no of
turns in both of windings.

Thanks

Answer / ismail

we have to connect if it is a three phase wires we have to
connect one of the wire is connect to power supply input
wire,and the another wire which is not connected has to
connect neutral

WHAT IS THE FORMULA FOR CALCULATING CURRENT RATING(DIRECT IN GROUND OR AIR) OF ARMOURED(XLPE) CABLE OF 4C,16Sqmm?

0 Answers  

why electrical power has benn needed for speed controller of woodward governor control for biomas power plant

1 Answers  

How to design CT for connected with Transformer OLTC operation? normally CT output design for 1A/5A range but during OLTC Tap position changing time how to function the CT?

1 Answers   HEG,

can i use 4 number of circuit breaker as single phase manual change over switch? if yes then how plz also send ckt diagram at nazimzamurad@gmail.com

0 Answers  

why knee point voltage should be high in Ct for differential protection

1 Answers   NTPC,

What is the difference between Rectifier & Converter?

12 Answers   Bajaj,

what is power

6 Answers   ABB,

A 200 KVA UPS's load current is 70 A. We want to provide a Generator back up. What capacity of DG required for this ?

1 Answers   Reliance,

CAN ANYBODY EXPLAIN WHAT ACTUALLY MEAN BY THE PHASE DEFFRENCE? R,L,C CIRCUITS?

5 Answers  

In CT's they mentioned 400/5 or 1250/5, 1000/1 here 400,1250,1000 is Breaker Capacity what is the /5 Explain me briefly

2 Answers  

Arrangement of earthing materials.like what we put first charcol,then salt.then plate. Plz answer me about that.

1 Answers  

Our transformer capacity is 500kva & voltage ratio is 11kv/433v step down tf.Now i need to know if my input voltage is 10500v and what would be the secondary side voltage i.e output voltage ?

3 Answers   Helma,