Answer / naresh

Description

The Active & Reactive Power block measures the active power P and reactive power Q associated with a periodic voltage-current pair that can contain harmonics. P and Q are calculated by averaging the V I product with a running average window over one cycle of the fundamental frequency, so that the powers are evaluated at fundamental frequency.

Answer / teja

active power: the actual power delivered to the load .
root over 3 v(line)*i(line)*cos (phi).
reactive pwer: the power which is not useful to the
load...it is the power used to compensate the losses that
occured in the machine...

Answer / s.ramakanth reddy

Power factor is defined as the ratio of real power to
apparent power. This definition is often mathematically
represented as kW/kVA, where the numerator is the active
(real) power and the denominator is the (active+ reactive)
or apparent power. Though the definition is very simple, the
concept of reactive power is vague or confusing even to many
of those who are technically knowledgeable.

Answer / navneet jangir

active power is the cos of angle between current(i)& voltage(v)
reactive power is the sin of angle between current(i)& voltage(v)

Answer / nimish

The power is which is actually utilised in the circuit is
known as active power and Reactive power is the loss
occures in the system due to its inertia.

Answer / saleem uddin

Reactive power is nothing but which is delivered by the
inductive load and does not do any usefulwork

Active power is the one which really useful in th system

Answer / mubtadi djasim iman

Double choise

Answer / t.gnanavel

active power is the real power for which we pay the power
bill which is not changing due to the power factor
maintained.where as the active or apparent power is the
product of the system voltage and the current without taking
power factor in account.but the value of the apparent power
is fully depends on power factor.

Answer / pankaj

when power towards you it is active power
active power is 1.732 VIcos (angle between current & voltage)0

Answer / purusothaman.t

active power : is a real power.unit for KW.
reactive power: is a apperent power.unit for KNAR.

In a synchronous motor. if start is running at high speed.  What will be the starting torque : Higher Lower Zero

0 Answers  

can we use inductor for passing or blocking of AC or DC?

3 Answers   Moser Baer, NTPC,

One VFD is possible to connect two motors at the same time?

2 Answers  

Dear all i want to know FEWA Electrical Supervisor Licence test Previous Year Questions ? If any body know please send to me shibin_75@yahoo.com

1 Answers   FEWA,

what is the vvvf in the dumbwaiter?? or lift. what is the actual process?/

0 Answers  

WE know that for Inductor X=2pifL,In DC f=0,then X=0 so,V=IX=0;But In the DC excitation of rotor of AC generator,DC motor field coil which coils are inductor so why does not applying DC voltage short the rotor coil of AC generator and field coil of motor?If it would then DC source might be damaged but it is not happened. Why does the strand conductor of Electrical power transmission line make twist?

0 Answers  

what is purpose of manual bybass in ups

3 Answers  

What does the term “voltage regulation” means?

0 Answers  

what are clipper and clamper circuits?

2 Answers  

How Flywheel run in DG set, tell in details

1 Answers   Sambhav, TATA,

what will happen power cables laid without gap in underground

1 Answers  

1))why we run three phase or three different circuit from a single conduit 2)) why not two circuit of different phase run in same conduit?? and why we run same three cicuit of same phae run in single conduit??

0 Answers   ACC,