Answer / dhruv samani

Check the type of fan - whether the fan is ceiling fan or table fan
Verify the number of blades on the fan
Verify the ON-OFF functionality of fan
Verify if the fan works normally-throws wind on the right direction
Verify the material of which fan's blade and other parts are made
Check the voltage/power requirement of the fan
Verify the maximum speed of fan
Check the minimum speed of the fan
Verify that the speed of fan can be regulated using regulator
Verify that when in motion, the fan should not wobble
Check the length of the fan rod and blades
Verify that the weight of the fan is as per the specifications
Verify that the color of the fan is as per the specifications
Check the effect of voltage fluctuation on fan when in motion
Check the effect of sudden electricity outage on fan's motor and other electrical parts
Verify the fan's condition when continuously switched on for very large duration
Check if there is any life time of fan's internal parts or the body
Check if the blades of the fan can be bend or not, check if its material is brittle
Check the time taken by fan to attain maximum speed, when switched ON

Answer / vinay kumar

Step 1: Check Pre Conditions like We need a fan and it should contain 3 or 4 wings(120 degrees or 90 degress)

step 2: Check for Functionality : the main objective of the fan is to blow air to the users.

step 3: Comes all ur answers like switch, rotation direction, Spped, Regulator etc...

Answer / sagar sherawat

check it Should have a hook for hanging in the roof.
fan Should run with minimum noise.
the blades Should have proper distance from the each blades.
Check whether it rotates in correct direction.
Check if does any sound while rotating or stopping.

How many test cases u will write for Adhoc testing?

4 Answers  

---

int a, int b, int c= (a+b); Write the test cases for c.

0 Answers  

---

Please Tell me the Real Process of a Company. My company is very small & Developer explains me the feature and I prepare the test cases according to he explained .No one is there to review what I have written in the test cases.Test cases are ok but still I have the knowlege of real testing documents i.e which documents I have to prepare What is the flow starting from requirement gathering.Please tell me ,Thanks in advance .It will really helpful to me

1 Answers  

---

can any one give the format of writing test cases in excel sheet.

15 Answers   PCS,

---

how to write test cases for credit card payment

6 Answers  

---

---

ATM REQUIREMENT TO BE TRANSLATED INTO TEST PLAN AND TEST CASES ATM REQUIREMENT AS FOLLOWS: Requirements Statement for Example ATM System The software to be designed will control a simulated automated teller machine (ATM) having a magnetic stripe reader for reading an ATM card, a customer console (keyboard and display) for interaction with the customer, a slot for depositing envelopes, a dispenser for cash (in multiples of $20), a printer for printing customer receipts, and a key-operated switch to allow an operator to start or stop the machine. The ATM will communicate with the bank's computer over an appropriate communication link. (The software on the latter is not part of the requirements for this problem.) The ATM will service one customer at a time. A customer will be required to insert an ATM card and enter a personal identification number (PIN) - both of which will be sent to the bank for validation as part of each transaction. The customer will then be able to perform one or more transactions. The card will be retained in the machine until the customer indicates that he/she desires no further transactions, at which point it will be returned - except as noted below. The ATM must be able to provide the following services to the customer: A customer must be able to make a cash withdrawal from any suitable account linked to the card, in multiples of $20.00. Approval must be obtained from the bank before cash is dispensed. A customer must be able to make a deposit to any account linked to the card, consisting of cash and/or checks in an envelope. The customer will enter the amount of the deposit into the ATM, subject to manual verification when the envelope is removed from the machine by an operator. Approval must be obtained from the bank before physically accepting the envelope. A customer must be able to make a transfer of money between any two accounts linked to the card. A customer must be able to make a balance inquiry of any account linked to the card. A customer must be able to abort a transaction in progress by pressing the Cancel key instead of responding to a request from the machine. The ATM will communicate each transaction to the bank and obtain verification that it was allowed by the bank. Ordinarily, a transaction will be considered complete by the bank once it has been approved. In the case of a deposit, a second message will be sent to the bank indicating that the customer has deposited the envelope. (If the customer fails to deposit the envelope within the timeout period, or presses cancel instead, no second message will be sent to the bank and the deposit will not be credited to the customer.) If the bank determines that the customer's PIN is invalid, the customer will be required to re-enter the PIN before a transaction can proceed. If the customer is unable to successfully enter the PIN after three tries, the card will be permanently retained by the machine, and the customer will have to contact the bank to get it back. If a transaction fails for any reason other than an invalid PIN, the ATM will display an explanation of the problem, and will then ask the customer whether he/she wants to do another transaction. The ATM will provide the customer with a printed receipt for each successful transaction, showing the date, time, machine location, type of transaction, account(s), amount, and ending and available balance(s) of the affected account ("to" account for transfers). The ATM will have a key-operated switch that will allow an operator to start and stop the servicing of customers. After turning the switch to the "on" position, the operator will be required to verify and enter the total cash on hand. The machine can only be turned off when it is not servicing a customer. When the switch is moved to the "off" position, the machine will shut down, so that the operator may remove deposit envelopes and reload the machine with cash, blank receipts, etc. The ATM will also maintain an internal log of transactions to facilitate resolving ambiguities arising from a hardware failure in the middle of a transaction. Entries will be made in the log when the ATM is started up and shut down, for each message sent to the Bank (along with the response back, if one is expected), for the dispensing of cash, and for the receiving of an envelope. Log entries may contain card numbers and dollar amounts, but for security will never contain a PIN.

1 Answers  

---

Explain the unit testing?

0 Answers  

---

Anyone can please inform me about how to write test cases for any mathematical calculations. Say for example, we have a formula in a given scenario for calculating the interest. The given formula for interest is: (principle * 5)/(12 * 100) In this case, the principle amount may vary. Would like to know how many test cases can be written for this scenario and how can we decide over this. I will be very thankful for the answer....

3 Answers  

---

what is baic requierment of yahoo mail? what is baic requierment of atm? what is baic requierment of coffee machine?

2 Answers  

---

If I have to write the test cases for any report & there is date box.then may I have to write only select date or have to write all steps required for selecting date

0 Answers  

---

how to test stand alone programs?

0 Answers   Accenture, Google,

---

In a log in page what will be test procedure,test scenario,test discription & test steps?

1 Answers  

---