What are the customization steps in sap?

0 Answers  

---

Are there any general rules for flushing slurry lines?

0 Answers  

---

how FOULING effectd the heat transfer rate

12 Answers   IOCL,

---

I want to need previous placement questions of Jindal

1 Answers   Jindal, Jindal Steel and Power,

---

Explain what are some typical applications for glass-lined reactors?

0 Answers  

---

---

Question 44 - In a non-dilute absorber, graphical method is used to represent the process. In an X - Y coordinate system, X-axis represents mole of carbon dioxide / mole of water and Y axis represents mole of carbon dioxide / mole of nitrogen. The inlet gas stream consists of 8 mol % of carbon dioxide in nitrogen. (a) Find the S / G minimum as a slope that goes through the point (0, 0.0304) and (0.0000488, 0.086957). (b) Find the actual slope of operating line when it is 1.5 times the S / G minimum! (c) Find the value of x for inlet gas stream when y = 1640 x, y is mole fraction of carbon dioxide in nitrogen.

1 Answers  

---

What compounds are responsible for the odors that come from wastewater treatment plants?

0 Answers  

---

Calculate the line size for a cooling water line with a volumetric flowrate of 1200m3/h of water. Density of water = 1000kg/m3

1 Answers  

---

CHEMICAL FLUID MECHANIC - EXAMPLE 3.2 : The terminal velocity of a falling object, v is given by v = sqrt [ 4g (R - r) D / (3Cr) ] where sqrt is the square root of, g = 9.81, D = 0.000208, R = 1800, r = 994.6, m = 0.000893. The Reynold number, L is given by L = rD (v) / m. The C for various conditions are : C = 24 / L for L < 0.1; C = 24 (1 + 0.14 L^0.7) / L for 0.1 <= L <= 1000; C = 0.44 for 1000 < L <= 350000; C = 0.19 - 80000 / L for 350000 < L. Find the value of v for the situation above by trial and error, ^ is power, <= is less than or equal to.

1 Answers  

---

ENGINEERING MECHANIC - EXAMPLE 15.2 : A cantilever beam of length L = 3 m carries a uniformly distributed load (UDL) of W = 20 N / m throughout the length. Calculate the bending moment, BM of the beam near the fixed end. What is the shear force, SF at this point? Let SF = -WL, BM = -LWL/2.

1 Answers  

---

In DM plant, If pH in anion outlet is 7.2 and Mixed bed pH is 6.2, wat could be the reason.

8 Answers   Cipla, Jindal,

---

Is there a rule of thumb to estimate the footprint of a cooling tower during design phase?

0 Answers  

---