Answer / guest

i am giving the test conducting by "jindal steel power
ltd." so that,s why i need previous placement quesions of
jindal company.

Explain the factors involved in designing kettle type reboiler?

0 Answers  

---

whats the allowed tolerance of pipe to pipe butt joint mismatching

0 Answers  

---

PROCESS DESIGN - EXAMPLE 21.3 : According to a heuristic of chemical engineering plant design, assume a pressure difference dP = 4 psi for each 10-ft rise in elevation. A pump is needed to pump liquid from a storage tank at a lower elevation to a heating tank at a higher elevation with the elevation difference of 60 ft. (a) Find the pressure loss due to such elevation. (b) If the required minimum inlet pressure to the heating tank is 9 psi, with 1 control valve is installed between pump and heating tank, what is the dP minimum required for the control valve and the entrance to the heating tank when the heuristic mentions that at least 10 psi is required for the control valve? (c) The pressure at the inlet of the pump is 8 psi and the flowrate of the liquid produces pressure head of 50 psi. What is the total pressure produced by the pump? (d) Assume a pipeline dP of 2 psi / 100 ft for liquid flow in a pipe according to heuristic, what is the approximate maximum length of the pipe in ft that can be installed between the pump and the heating tank?

1 Answers  

---

Name some common causes of control valve noise?

0 Answers  

---

Is there a rule of thumb to estimate the footprint of a cooling tower during design phase?

0 Answers  

---

ENGINEERING MATHEMATICS - EXAMPLE 8.1 : A local utility burns coal having the following composition on a dry basis : Carbon (C) 83.05 %, hydrogen (H) 4.45 %, oxygen (O) 3.36 %, nitrogen (N) 1.08 %, sulfur (S) 0.7 % and ash 7.36 %. Calculate the ash free composition of the coal with reference to C, H, O, N and S.

1 Answers  

---

i need last year question paper of GATE exam of chemical stream.but i failed i geting exam papers.soits humble request to u that if any body found last years GATE exam paper of chemical stream then send it to on this mail address.i shall be thankful to u for this. mail address:- sachin_4255@yahoo.co.in thank you.

0 Answers  

---

What is the best way to configure a bypass line in slurry services?

0 Answers  

---

plz send the interview questions in the written test asked by hindustan petroleum corporation ltd.Iam a b>tech in chemical engineering.My written test is on feb 2008.urgent plz.send the questions to avazithraja@rediffmail.com

9 Answers   AZTEC, Bapex, HPCL,

---

Repected sir/Madam, I am goingb to face IOCL technical as well as HR interview, can you forward your hellpfull hand for toward me to sort out my problem by giving some imp interview quetion which is generally asked in chemical industries such like IOCL,HPCL,ONGC,BPCL,RIL,what is the difference in pump,blower & in compressor

0 Answers   IOCL,

---

What are some good uses of low-grade steam at 12 atm and 1920c?

0 Answers  

---

How LPG gets liquefied by elevating the pressure?If the pressure is increased the temperature also increases,then how LPG is in liquid form?

1 Answers  

---