What would be the steps and parameters in case if a fault occurs in transmission line at a distance far from the generating station?

0 Answers  

---

List few applications of d.c series motor?

0 Answers  

---

why voltages are added when batteries are connected in series?

4 Answers  

---

State the factors, for the choice of electrical system for an aero turbine.

0 Answers  

---

in the directional overcurrent and earthfault protection,normally we are setting the angle 45 deg lead for phase fault overcurrent and -45 deg lead for earthfault fro forward direction.but both the fault are operating on the same angle region only.why?how the relay will response?

0 Answers  

---

---

IF I USED VVVF DRIVE IN FAN APPLICATION MOTOR IN 6.6 KV ( 700 KW) MOTOR & DURING NORMAL RUN OPERATION TIME IF RPM SUDDENLY REDUCE IN MOTOR BY DRIVE(E. MOTOR RPM REDUCE SUDENLY 687 TO 550 RPM) WAHT WILL BE HAPPEND IN DRIVE

1 Answers  

---

what is the difference between ac and dc?

1 Answers  

---

A group of machines (wind turbines) connected with 33KV feeder and each machines are having individual VCB. The 33KV feeder connected with 110KV/33KV substation. The 33KV feeder tripped by over current at Substation and fault recorded at Substation as OC-R&Y phase. Same time the group of machines VCB tripped by over voltage, the fault recorded voltage was above 66KV by numerical Under/Over voltage relay. While grid drop time, this much of voltage hike is possible?

1 Answers  

---

In 6600/√3/110/√3v voltage transformer,how much output voltage in open delta transformer,after removing 1-phase of primary side on transformer?

2 Answers  

---

Why NGR is provided in sub station?

4 Answers   MMS,

---

why Transformer and DG rating capacity is in KVA

4 Answers   ACC,

---

I AM COMPLETED DIPLOMA IN E.E.E. AS WELL AS B.TECH IN ANDHARPRADESH.. HOW I THE Certificate of competency as Electrical Supervisor.

1 Answers  

---