how many brick in 1 cubic meter with mortar ?
Answers were Sorted based on User's Feedback
Answer / aftab
cubic meter contains 500 bricks
The Standard size of the 1st class
brick is 190mm x 90mm x
90mm and motor joint should be
10mm thick
So brick with motor=200 x 100 x
100.
Volume of 1st class brick = 0.19 x
0.09 X 0.09 = 0.001539
cu.m
Volume of 1st class brick with
motor =0.2 x 0.1 x 0.1=0.002
cu.m
No. on bricks per 1cu.m= 1/
volume of1st class brick with
motor
=1/0.002
= 500 nos of bricks.
So 500 bricks needed(aprox).
Is This Answer Correct ? | 11 Yes | 1 No |
Answer / amalvijay
The quantum of Bricks with CM is ~ 450Nos in 1Cum.
Is This Answer Correct ? | 1 Yes | 2 No |
What is grouting? Why it is done?
how many quantity of water use in 1cu.m. concrete
How do you determine specific gravity of cement?
What is the cost of Brickwall ( 4")(1:4) thick wall total Area 245 sqft with plaster(1:6). With all materials including.
different types of rcc slab
As shown in IS 456-2000 minimum cement content is include fly ash?
How much the quantity of Dry material of Crush for 1:2:4 Concrete, using pan 3/8'' down....
What is CRMB ? And how it is beneficial to the service life of the road?
Using 1 lit paint how many sq.ft of wall we can paint. Thanks.
In the present situation of ban on mining sand from rivers,can we go for formation of earth dam filters viz;Horizantal sand blanket,inclined chimney and filters under rivetment with crushed rock sand of 6mm down size.If so what are the specifications and is there any codal provision for its authentication?
What the advantages and disadvantage of using 90mm and 100mm bricks for a wall of a house? Thanks for any input.
A rock anchor 3 1/2” in diameter is placed in rock. The which has an allowable shear strength of 1200 psi. Determine the required anchorage length to safely carry a 80 ton load using a 2.0:1 F.S