HOW BETTER VOLTAGE REGULATION IS OBTAINED BY HIGH VOLTAGE
TRANSMISSION....?
as the current to be drawn by the load in case fixed power is being transffred is being proposonal to p/(v cos*).if the voltage level is high he losses and current drawn will be less so impedance drop will be less.so voltage from no load to full load will be nearly same so voltage regulation wiill inproveddd.
| Is This Answer Correct ? | 4 Yes | 3 No |
Define noise?
plz tell me in detail about c.t. and p.t. ?
how to calculate the phase diffrence beetween given two equetion y= 15sin(wt+pi/3) and y=10sin(wt-pi/4)
Which of the following connection is best suited for 3-ph, 4 wire system A delta-delta B star-star C delta-star D star-delta
What is maximum permissible length of cable from transformer (33kV/0.433kV) HT side to HT panel which contain VCB? In which standard i shall get this information.
why does same amount of current flow in the circuit inspite of any number of resistances in the circuit?
there is a power transformer 66/11kV in delta-delta connection has 5 feeder coming out from the secondary side. One of the feeder in it normally loaded (loaded than other feeder)and this feeder usually trips with double OCR causing the bank transformer to trip. Now if the load of this feeder is put on other transformer then that no problems occurs on that transformer or the load. However normally all the test(IR, PI, short ckt, open ckt,grounding test and other ) has been conducted for this but evertything transformer..... I am not geting what is the actual problem...
iam working in power plant. In hot places tube lights are glowing at the end portion only. what is the reason for that?
why ac supply neutral should earth not in dc (-)
who iz power minister ?? :P
Q. calculate the value of the resistor to be connected in series with a 100W; 230V lamp so that the wattage of the lamp is reduced to 35W
what is 3 phase motors
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)