Answer / kj

In a 3 phase system the usual way of connecting the
transformer is in star to have a neutral. The current
flowing in the neutral does not flow to earth but to the
star point. The star point is the opposite end of the
windings where the phase is connected and the 3 are joined
together. The current in a balanced 3 phase system for
example a 3 phase motor flows through the phase wires and
not the neutral. An unbalance would be where something is
connected to a single phase and the neutral. This would be
lights for example. Here the current flows from the phase
and back through the neutral.

why we use capacitor in Fans not resistor?

4 Answers   Vardhman,

---

what are the reasons for overheating in electrical machines?

3 Answers  

---

In a poly phase circuit if clamp on meter shows same load on three phases and their sum on neutral then why we use three and a half core cable or maximum the same size of core as that of phase?

1 Answers  

---

what is Over current, earth fault (O/C+E/F) ?

2 Answers  

---

why on axial hitting up of air blast on hydrogen produced in oil circuit breaker,temperature rises of the core of the arc?

0 Answers  

---

What is core CT & it's function?

0 Answers  

---

what would happen if u assume to insulate all the overhead lines and no insulators....??do you think it to b an advantag or a disadvantage??justify.

3 Answers  

---

Meggering minimum acceptable Ohms for insulation resistance.

1 Answers   TATA, Wood Group,

---

whenever a squirrel or a crow gets tangled near the out put of the feild transformer there is a discharge of 440 volts of current through the neutral due to which my appliances blow up causing a huge bang.will the RCCB help in these conditions

1 Answers  

---

1. Synchronization is not required A. Thermal B.Hydel C.Wind D.Nuclear

2 Answers   APGenco, Birla Power,

---

What are the types of transformers according to the arrangement of iron cores?

0 Answers  

---

operation of diesel generator

0 Answers  

---