How to convert KVA rating into HP rating?
Answers were Sorted based on User's Feedback
Answer / sheeraz ali
It depends upon the power factor,
As 1HP =746 W =0.746 KW
and
apparent power (KVA)= Active power (W) / P.F
if P.F is 0.8 then,
KVA=0.746 / 0.8 = 0.9325
if P.F is 0.9 then,
KVA=0.746 / 0.9 = 0.8288
Is This Answer Correct ? | 11 Yes | 1 No |
Answer / sheeraz ali
sorry its
apparent power (KVA)= Active power (KW) / P.F
Is This Answer Correct ? | 2 Yes | 0 No |
KVA is apparent power and HP is real power.
Is This Answer Correct ? | 2 Yes | 2 No |
Answer / simon
For e.g 1 Kw=1000Wt
1000Wt=250 v*4 Amp (in 1 Phase)
1000Wt=440v*2.27Amp(in 3 Phase)
1 Hp=735.5Wt
Is This Answer Correct ? | 0 Yes | 1 No |
HOW DO I CALCULATE THE SETTINGS FOR THE DIFFERENTIAL PROTECTION OF A 12kV/6.6kV, 6MVA,DYN11 XMER WITH PRIMARY SIDE CTR 400/1 AND SEC SIDE CTR 600/1?
is the secondary voltage of current transformer greater than primary voltage,,,,,,,,] give the example with ct burden,current ratio,and primary and secondary side voltage?
In what condition the HT fuse breakes?
What is industrial automation ??????
what is the requirement of commutator in a universal motor?
IF we have 500kva transformer 11.0/0.415V, 50Hz. How to calculate the current on HT & LT side, how can we consider for its breaker (HT & LT both)? You are requested to solve the question herewith.
3 Answers Bhutan Power Corporation,
What is the count of hvdc transmission lines in india?
why capacitor burst?
a wire in which bulb is connected there is two terminal when one terminal is connected to phase than why the value of current shock in nutral terminal is max. or large??
why impudance relay used for medium transmission power system? why not others?
What is the function of restraining coil in differential relay? as well as restraining current?
what is the resultant phase shift in a 3 phase power system including neutral if on or more phases gets grounded or short circuited. kindly explain in detail for the reasons...