how to diffenentiate the fixed beam and simply supported
beam in the execution while reading the drawing and how the
reinforcement detail will be differ for the above.
No Answer is Posted For this Question
Be the First to Post Answer
the capacity of water tank in liters if the diameter is 3m, and maximum height of water level as 1m.
What are the tests conducted on coarse aggregates ?
why red bricks used for brickbat coba
state the main objectives of underpinning
Insted of water is there any liquid to mix in concrete / in mortar ?
Explain what is zoning permit?
how much least count of levelling ?
What is the tensile strength of wood?
In an aggregate blending plant, water is sprayed before blending is performed. If the fine content in aggregate is as high as 25 %, will not the fines form into lumps / balls and distribution will not be uniform ? Further, the fines will stick onto the interior of pug mill and its content will be low. The mixed material is stockpiled for weeks / months before use. Will it not be better that blending is done in dry condition, and water will be added only during compaction at site. Please forward your comments and suggestions.
Design a cantilever slab to carry a live load of 2000 N/m2. The overhang of the slab is 1.20m. b) A slab over a room is 4.75m x 4.75m. The edges of the slab are simply supported and the corners are not held down. The live load an the slab is 300 Kg/m2. The slab has a bearing of 15cm. On the supporting walls. Design the slab as per Rankine - Grashoff theory. Assume weight of R.C.C. = 2400 Kg/m2.
what is the approximate density in kg/m3 of compacted hardcore for building foundations
1 Answers Era Infra Engineering,
what is the difference between sill beam,Tie beam and plinth beam?
Civil Engineering (5086)
Mechanical Engineering (4453)
Electrical Engineering (16638)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)