Answer / dhayalan rja

Maximum vaccume -1 bar only ((760 mmhg )

Answer / sandeep

its 760 mm of hg.

Answer / satishkumar

maximum vacuum = -760 mmhg
= -1 bar
= -1 kg/cm2
= -14.7 psi

below the atmospheric pressure is called vacuum. 760 mmhg
pressure is equal to the atmospheric pressure value.

Answer / muhammad abu bakar

max vaccume is 1 bar or 760 mm of hg or 14.50 psi or 10472 mm
of water

as an instrumentation engineer which are the things we have to know / or we must have idea about that....

2 Answers  

---

can anyone tell me about the basic concepts to consider before to start a PLC panel wiring

0 Answers   ABB,

---

calibration of instruments.

11 Answers   ONGC,

---

how to relay switch sense the fault?

0 Answers   ME,

---

Lux meter is the measuring device to measure the lux level of lighting fixture. in industrial sector two types of lighting fixture is being used as street lighting purpose 1. HPSV (Sodium) and 2. HPMV (Mercury). HPMV having white light which is an combination of red, blue and yellow colour, while HPSV haivng Yellow lighting. in HPSV red & blue colour will be absent. during measurement of the lux level of HPSV and HPMV fixture. 1. Lux meter can measure the actual lux level of both fixture? 2. or it will show false reading for HPSV fixture light as it has only yellow light present. please give me answer

0 Answers   Ace Info,

---

what is the meaning of HART ?

2 Answers  

---

why r using 250 resistances

6 Answers   Sabic, Samsung,

---

what is the meaning of wet leg & where is it used?

1 Answers  

---

I will attend an interview with GasGas company for a position of Instrument Technician ( Offshore )in next month can anyone tell me what questions they will ask. Thanks in advance.

0 Answers   RasGas,

---

why use squareroot in flow measurment by dp transmitter?

4 Answers  

---

Transducer Input 0 to 230 v ac Output-0 to 10vdc Receiver Input 0 to 10 vdc and Output 4 to 20 ma How?

1 Answers  

---

An electronic p controller has an input range of 1-5v, and output range of 4-20mA, while testing a step change of 0.4 was applied at the input , the PB setting was 50% ,what should be the change in the output ?

1 Answers   Reliance,

---