Answer / md zakeer hussain

In star connected stator the line voltage is equal to
1.7321 times the phase voltage, but in case of the Delta
connected stator the line voltage is equal to phase voltage
as we done the calculation of poly phase balanced and
unbalanced networks.
the relation between the phase voltage in star connecred
stator to delta connected stator is,

Delta connection: Vline = Vphase ------(1)
Star connection: Vline = 1.7321 X Vphase-----(2)
from equation (1) & (2)

Vph(Delta) = 1.7321 X Vph(Star)

The 3 phase 400 hp 440 volt slip ring induction motor do not take one phase amps why ? The motor is running good condition

0 Answers  

---

What is the effect on power factor, shown by a trivector meter; incase of reverse phase sequence. If the power factor of a system is lag what meter will show in case of reverse phase sequence connected to the meter. and What in case of lead.

0 Answers   TATA,

---

why excitor coil of an alternator can fail

3 Answers  

---

what is the formula of starting current of 3phase and 1 phase motor???

0 Answers  

---

11KW Delta motor is taking about 44Amps in star and goes upto 70Amps in delta and trips OFF. The rated current is 26Amps. Application is for the blower. The motor takes ( no load without coupling impller ) only 2.5A and 5Amps in star & delta starter test.Need to know why its taking high current.

10 Answers   Pfizer,

---

how we can know the rating of transmission line by no. of insulators disk ??????????

3 Answers   NTPC,

---

In a 3 phase,400v,4 wire system, 2 incandescent lamps, one having 230v,100w and the other 230v,200w are connected between r phase- neutral and y phase-neutral respectively. If neutral wire breaks which lamp will fuse first and why?

3 Answers   Eskom, SSC,

---

what is the difference SCR & TRIAC?

13 Answers   TCS,

---

1.stranded resistance values of motors? 2.how to calculate the resistance values of single phase and 3phase motors?

2 Answers   Bell, L&T,

---

WHaT IS THE CONCEPT OF INDUCTION LAMPS IN MODERN LIGHTINGS, and HOW IT WORKS TO EMIT LIGHT ( AS NO ELECTRODES ARE PRESENT ) ?" COULD INDUCTION LAMPS CAUSE INTERFERENCE WITH COMUNICATIONS INTO A STORE USING INDUCTION LIGHTING ? WHAT IS THE BENEFIT OF USING THE LOW FREQENCY INDUCTION LAMP , VERSUS LED , AND VERSUS FLUORESCENT, AND VERSUS ANOTHER KIND OF LIGHTING . THANK yOU MOISES GUINDI

0 Answers  

---

2. A current i=(10+10 sin t)amperes is passed through MI type ammeter. its reading will be.........

0 Answers   SSC,

---

am commissioning the trafo without connecting the neutral therefore unbalance will occur what is the alternative solution for this?

0 Answers   L&T,

---