Answer / jignesh patel(abb)

field bus is a digital communication link between field
instruments and process control system like DCS,now a days
field bus is widely used for transmitting of signals
The type of field bus is...
1.Modbus
2.Profibus
3.Foundation fieldbus
4.CAN
5.Profinet
6.Ethernet.

Answer / patrik

field bus is the latest technology used in the process
industry for transmission of signals.it eliminates the heavy
wiring used in the traditional 4-20 mA transmission.it also
enables the manufacturers to use the latest SMART devices
avilable in the market .

Answer / faiyaz ahmad

Field bus is communication protocol which is used to communicate between the transmitter and controller like PLC and DCS Transmitting and receiving the signal through a Field bus protocol.

How to convert mmWc(mili meter water colam) to tph(ton per hour)?

0 Answers  

---

why would you like to join our company

0 Answers   Aramco,

---

Advantages of servers over normal desktop in PLC SCADA system

1 Answers   InfoMedia,

---

We do have a problem in the company that is one PT connected to PlC which is mean 1 out of 1 in PLC system we do have the PAHH is 55 mbar and PALL 8 mbar with a timer of 15 sec for the PAHH the problem started when PAHH goes more than the set point which is 55 it reached up to 71 but due to timer doesn't trip . We force it and we checked everything nothing there . We replaced the transmitter problem still there the reading goes more than the 55 bar the range for transmitte is 0- 60 mbar . So we did loop check , aculaizing valve , wiring all are okay . What the possible causes for this ???

2 Answers   National Petrochemical Company,

---

why 4 to 20 ma ,why not 0 to 20 or 3 to 15 or anything

19 Answers   Honeywell, TCS, TN,

---

How flow control valve is working with pnuematic positioner and I/P convreter from command is given from remote

1 Answers   Ecil, GAIL,

---

hiii.... can any one provide me previous years question paper of hindustan petroleum for instrumentation engineering???

0 Answers  

---

What is input and output of plc & dcs

2 Answers  

---

Explain level troll principle & interface level measurement.

1 Answers   ADMA OPCO,

---

how can loop single 4-20 ma to two isolation amplifier? i mean i have two isolation amplifier with 4-20 ma input and 1-5 v output.can i done series connection ?

1 Answers  

---

How to check loadcell working or notworking

2 Answers  

---

I am applied 100 % pressure on to the air to open control valve,but the valve is not fully closed..and 10-15% is open the valve. how to calibrate the control valve?

3 Answers   OPaL,

---