Answer / vikram babu t.r

The Basic difference between the PLC and the DCS is PLC is
Programmable Logic Controller in an n/w it control program
logically.DCS is Distributed Control System it will
distripute and control the system in a n/w or more. So Group
of PLC is know as DCS.

Answer / saravana kumar

The major difference between PLC and DCS is networking...and
most often PLC is used for ESD applications..for shutdown
sequence .....PLC cannot have a HART compitable I/O ...where
HART signls are used for Asset management..DCS you can have
all features such as asset man..

can you send remote seal interface level transmitter calculation steps for oil water saperator.

0 Answers   Sasol Firm, Thermax,

---

Whether the DP transmitter can be utilised in the medium of Vaccum for the measurement of Level?

10 Answers  

---

What is instrumentation technologists and mechanics?

0 Answers  

---

If a warning lamp will operate with the ground circuit is bypassed with a jumper wire to ground, what should you check?

0 Answers  

---

if we put any thermocouple on a table in a room without any connection,what temperature should it show.

3 Answers  

---

what is function of vibration, and how is it work, explain with difination

1 Answers   Bapco Bahrain Petroleum Company,

---

WE ARE HAVING YOKOGAWA CENTUM CS 3000 DCS, 2 FCS AND 4 HIS " When the operation Download to HIS message appears: Equalize start. HIS0163 WARNING: Could not connect to equalize destination. (7001) Retrying. Number of retries = 0/1 ERROR: LdXopsLoadMain: connect error 10060 ERROR: LdXopsLoadMain: connect error 10060 ERROR: Processing terminated due to connection error. (7002) Equalization end with errors. HIS0163 ---- ERROR = 3 WARNING = 1 ---- Tell me, please, why and how to solve the problem."

6 Answers   Khas Pvt Ltd, Yokogawa,

---

pressure switch range 0 to 2bar.i have to install from ground level to 5 meters height.what is the formula the to increse the range ? and every 1 meter how much pressure should be add ?

3 Answers  

---

How to find out the current of two motors having same power consumption but different RPM?

0 Answers  

---

what would be the minimum flow rate that we can measure on rotameter..?

0 Answers   TATA,

---

how can you change unit of totalizer in siemens mag 5000 flow meter?

2 Answers   PowerTech,

---

what is the advantage of submersible level transmitter compare to ultrasonic level transmitter?

0 Answers  

---