what is 6 pulse and 12 pulse inverter? Explain brifly
Answers were Sorted based on User's Feedback
Answer / k parmar
In the six pulse inverter the 3 phase AC rectified in full
wave bridge and we get sixpulses in the output.
Where these two six pulse are connected in series it given
12 pulses in the out put. here the double secondery of
transformer requied the maitain the phase difference of 15
degree (Ddy11).
| Is This Answer Correct ? | 13 Yes | 6 No |
Answer / d.das
12-Pulse Inverter is essentially two 6-Pulse Inverters
supplied from transformer secondaries with phase shift. The
secondaries of the supply transformer are commonly chosen
as Star and Delta with a Phase Shift of 30deg. The 12-Pulse
Inverter is preferred over 6-Pulse Inverter due to its
inherent capability of suppressing third harmonic current.
| Is This Answer Correct ? | 8 Yes | 3 No |
WHAT WILL HAPPEN WHEN THE MOTOR FREQUENCY INCREASED OVER THE RATED MOTOR RPM THROUGH DRIVE?
What are Directly Exited Generators?
how can i select the cable ratings
What is Grounding?
What happen if in three phase 440 v , when you check voltage by testor it glows except one phase and in the same time when you check by multimeter it shows 440 v in any two phase.what will be the reason...
Can a 50-Hz designed transformer be used at 60-Hz system? Is the same remains true, when a 60-Hz designed transformer be used at 50-Hz system? Consider only frequency variation. The voltage remains as rated value in all cases. Justify the answer.
What is the difference between automatic & semi-automatic star-delta starters?
what happen if generator of micro hydro running at only a small percentage of its capacity, as a comparison, if the diesel generator that runs on only a fraction of its capacity there will be a wet stacking
will the introduction of capacitor bank parallel with the induction load reduce power consumption
4 Answers Nokia, WAPDA Water and Power Development Authority,
i am electrical engineer i cant get job in pure electrical industry ,but i got job in instrumentation field whether there is good scope for me, as i am fresher i m not well with the industrial trends so any experienced engineer pls reply me
How much heat will a 2500 KVA transformer will generate ?
1. What is maximum permissible distance between smoke detectors ? 2. How do we decide number of smoke detectors required in a large office, warehouse, hall etc ? 3. What should be maximum height of smoke detectors ? 4. Where do we use heat detector, optical smoke detector, temperature sensitive detector ?
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)