If we use oil,inner on the column box, it'll make rust on the column steel

If we use oil,inner on the column box, it'll make rust on
the column steel?

Question Posted / guest

4 Answers
7277 Views
I also Faced
E-Mail Answers

Answers were Sorted based on User's Feedback

If we use oil,inner on the column box, it'll make rust on the column steel?..

Answer / abhijit

Oil is applied on the shuttering which is used for columns.
This helps in easy removal of the shuttering.
Steel would not rust because of this oil.

Is This Answer Correct ?

12 Yes

2 No

If we use oil,inner on the column box, it'll make rust on the column steel?..

Answer / g.aravinda kumar

oil applying to shuttering sheets and before placing of the
shuttering to the column, tie the cover block to the column
reinforcement due to this to avoid the oil will not touch to
the column reinforcement.

Is This Answer Correct ?

10 Yes

0 No

If we use oil,inner on the column box, it'll make rust on the column steel?..

Answer / rrr

oil does not cause steel to rust, its only makes easy to remove shuttering, oil acts as a protective layer to steel so exposed steel railings are coated with oil paint to protect, if oil is present in RCC steel please clean before concreting it acts as debonding agent between steel and concrete.

Is This Answer Correct ?

6 Yes

0 No

If we use oil,inner on the column box, it'll make rust on the column steel?..

Answer / sunil

oil can be used in plates before placing the column box, and also we can use cover blocks to prevent touching to the column steel

Is This Answer Correct ?

0 Yes

0 No

Post New Answer

More Civil Engineering Interview Questions

asubmerged weir is one in which the water level on the down stream side of the weir is just at the crest level below the crest level above the crest level at stamp elevation as water surface on upstream

0 Answers

name three materials used in drainage work

7 Answers

why we provide plastic sheet under lean concrete/pcc.?

2 Answers

20. Do you adapt easily to new environment, job?

2 Answers

mix design procedure, i.e m15 to m40

1 Answers Power Grid, SMG,

I s code of steel

6 Answers Cicon Engineers,

What is the differential length of steel reinforcement? What is the over lap length of steel in different grades of concrete?

1 Answers L&T,

What is the ratio of materials used for M10, M15, M20 & M25 grades of concrete? Also specify the quantity of water used in each grade & how to calculate it?

4 Answers AVS,

why 1.25 factor is to be multiplied to cylindrical strength of concrete while getting the equvalent cubical strength of concrete?

10 Answers

details of steeel

2 Answers NCC,

CAN V USE CRUSH SAND FOR CLAY BRICK MASONARY

0 Answers

What is .Dwg?

0 Answers

For more Civil Engineering Interview Questions Click Here